Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

Guojiao Ding; Rujie He; Keqiang Zhang; Niping Zhou; Hao Xu

doi:10.1016/j.ceramint.2020.04.196

Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

Guojiao Ding, Rujie He^*, Keqiang Zhang, Niping Zhou, Hao Xu^*

^*此作品的通讯作者

先进结构技术研究院

科研成果: 期刊稿件 › 文章 › 同行评审

115 引用（Scopus）

摘要

Silicon carbide (SiC) ceramic is the most prospective candidate material for space-based lightweight optical mirror. Stereolithography 3D printing has been reported to fabricate many kinds of ceramics, showing great potential for fabricating lightweight SiC ceramic optical mirror. In this paper, SiC ceramic was fabricated using stereolithography 3D printing combined with polymer burn-out, pre-sintering, and precursor infiltration and pyrolysis (PIP). The relative density, flexural strength, and microstructure during each step were investigated. The as-prepared lightweight SiC ceramic optical mirror exhibited high accuracy and high quality. Finally, it was proved that stereolithography 3D printing has a great potential for lightweight SiC ceramic optical mirror fabrication.

源语言	英语
页（从-至）	18785-18790
页数	6
期刊	Ceramics International
卷	46
期	11
DOI	https://doi.org/10.1016/j.ceramint.2020.04.196
出版状态	已出版 - 1 8月 2020

访问文件

10.1016/j.ceramint.2020.04.196

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{80bbdd203d49404187000357374e366c,

title = "Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror",

abstract = "Silicon carbide (SiC) ceramic is the most prospective candidate material for space-based lightweight optical mirror. Stereolithography 3D printing has been reported to fabricate many kinds of ceramics, showing great potential for fabricating lightweight SiC ceramic optical mirror. In this paper, SiC ceramic was fabricated using stereolithography 3D printing combined with polymer burn-out, pre-sintering, and precursor infiltration and pyrolysis (PIP). The relative density, flexural strength, and microstructure during each step were investigated. The as-prepared lightweight SiC ceramic optical mirror exhibited high accuracy and high quality. Finally, it was proved that stereolithography 3D printing has a great potential for lightweight SiC ceramic optical mirror fabrication.",

keywords = "3D printing, Ceramic mirror, Precursor infiltration and pyrolysis, SiC, Stereolithography",

author = "Guojiao Ding and Rujie He and Keqiang Zhang and Niping Zhou and Hao Xu",

note = "Publisher Copyright: {\textcopyright} 2020 Elsevier Ltd and Techna Group S.r.l.",

year = "2020",

month = aug,

day = "1",

doi = "10.1016/j.ceramint.2020.04.196",

language = "English",

volume = "46",

pages = "18785--18790",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd.",

number = "11",

}

TY - JOUR

T1 - Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

AU - Ding, Guojiao

AU - He, Rujie

AU - Zhang, Keqiang

AU - Zhou, Niping

AU - Xu, Hao

PY - 2020/8/1

Y1 - 2020/8/1

N2 - Silicon carbide (SiC) ceramic is the most prospective candidate material for space-based lightweight optical mirror. Stereolithography 3D printing has been reported to fabricate many kinds of ceramics, showing great potential for fabricating lightweight SiC ceramic optical mirror. In this paper, SiC ceramic was fabricated using stereolithography 3D printing combined with polymer burn-out, pre-sintering, and precursor infiltration and pyrolysis (PIP). The relative density, flexural strength, and microstructure during each step were investigated. The as-prepared lightweight SiC ceramic optical mirror exhibited high accuracy and high quality. Finally, it was proved that stereolithography 3D printing has a great potential for lightweight SiC ceramic optical mirror fabrication.

AB - Silicon carbide (SiC) ceramic is the most prospective candidate material for space-based lightweight optical mirror. Stereolithography 3D printing has been reported to fabricate many kinds of ceramics, showing great potential for fabricating lightweight SiC ceramic optical mirror. In this paper, SiC ceramic was fabricated using stereolithography 3D printing combined with polymer burn-out, pre-sintering, and precursor infiltration and pyrolysis (PIP). The relative density, flexural strength, and microstructure during each step were investigated. The as-prepared lightweight SiC ceramic optical mirror exhibited high accuracy and high quality. Finally, it was proved that stereolithography 3D printing has a great potential for lightweight SiC ceramic optical mirror fabrication.

KW - 3D printing

KW - Ceramic mirror

KW - Precursor infiltration and pyrolysis

KW - SiC

KW - Stereolithography

UR - http://www.scopus.com/inward/record.url?scp=85083702061&partnerID=8YFLogxK

U2 - 10.1016/j.ceramint.2020.04.196

DO - 10.1016/j.ceramint.2020.04.196

M3 - Article

AN - SCOPUS:85083702061

SN - 0272-8842

VL - 46

SP - 18785

EP - 18790

JO - Ceramics International

JF - Ceramics International

IS - 11

ER -

Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

摘要

访问文件

其它文件与链接

指纹

引用此