TY - JOUR
T1 - Simultaneous enhancement of strength and ductility of additively manufactured single-phase Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy via oxygen doping with oxidized powder
AU - Duan, Xunan
AU - Cui, Jiaxiang
AU - Liao, Luhui
AU - Qin, Juming
AU - Wang, Penglin
AU - Sun, Shi Hai
AU - Ke, Huibin
AU - Wang, Liang
AU - Huang, Fengshan
AU - Xue, Yunfei
N1 - Publisher Copyright:
© 2026
PY - 2026/10
Y1 - 2026/10
N2 - Improving the performance of alloys fabricated by additive manufacturing (AM) through a simple process based on the existing composition is a topic of great interest. In this study, we proposed a strategy of doping oxidized powder to improve the strength and ductility of Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy (LRHEA) fabricated by direct energy deposition (DED), a typical AM method, and systematically investigated the effects of the oxidation degree of doping oxidized powder on the microstructure and mechanical properties of the AM sample. The results show that the oxygen from the oxidized powders was uniformly dissolved in the sample fabricated by doping 50 wt% medium-oxidized powders (oxygen content is 0.32 wt%). The oxygen promoted the formation of local chemical ordering (LCO), increasing its content from 3.6 ± 0.5% to 10.1 ± 1.1%. The yield strength and elongation of the sample increased from 855 ± 11 MPa and 16 ± 1.6% to 1023 ± 15 MPa and 26.7 ± 2.1%, respectively. The increase in strength is mainly attributed to the strengthening effects of interstitial oxygen and LCO, while the improved ductility is attributed to the development of secondary slip bands induced by LCO and the extensive formation of kink bands, which enhance the uniform deformation capability of the alloy. In contrast, although doping with 50 wt% highly-oxidized powder (oxygen content is 0.64 wt%) further increased the yield strength of the sample (1105 ± 21 MPa), significantly reducing the elongation of the sample to 0.8 ± 0.4% owing to the excessively high oxygen content and the formation of defects. This study provides new insights and process strategies for improving the performance of alloys fabricated by AM.
AB - Improving the performance of alloys fabricated by additive manufacturing (AM) through a simple process based on the existing composition is a topic of great interest. In this study, we proposed a strategy of doping oxidized powder to improve the strength and ductility of Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy (LRHEA) fabricated by direct energy deposition (DED), a typical AM method, and systematically investigated the effects of the oxidation degree of doping oxidized powder on the microstructure and mechanical properties of the AM sample. The results show that the oxygen from the oxidized powders was uniformly dissolved in the sample fabricated by doping 50 wt% medium-oxidized powders (oxygen content is 0.32 wt%). The oxygen promoted the formation of local chemical ordering (LCO), increasing its content from 3.6 ± 0.5% to 10.1 ± 1.1%. The yield strength and elongation of the sample increased from 855 ± 11 MPa and 16 ± 1.6% to 1023 ± 15 MPa and 26.7 ± 2.1%, respectively. The increase in strength is mainly attributed to the strengthening effects of interstitial oxygen and LCO, while the improved ductility is attributed to the development of secondary slip bands induced by LCO and the extensive formation of kink bands, which enhance the uniform deformation capability of the alloy. In contrast, although doping with 50 wt% highly-oxidized powder (oxygen content is 0.64 wt%) further increased the yield strength of the sample (1105 ± 21 MPa), significantly reducing the elongation of the sample to 0.8 ± 0.4% owing to the excessively high oxygen content and the formation of defects. This study provides new insights and process strategies for improving the performance of alloys fabricated by AM.
KW - Additive manufacturing
KW - Kink band
KW - Lightweight refractory high-entropy alloys
KW - Local chemical ordering
KW - Oxidized powder
UR - https://www.scopus.com/pages/publications/105050176285
U2 - 10.1016/j.matchar.2026.117009
DO - 10.1016/j.matchar.2026.117009
M3 - Article
AN - SCOPUS:105050176285
SN - 1044-5803
VL - 240
JO - Materials Characterization
JF - Materials Characterization
M1 - 117009
ER -