跳到主要导航 跳到搜索 跳到主要内容

SACE scanning process assisted with ultrasonic vibration on quartz glass

  • Yuge Luo
  • , Hao Tong*
  • , Guodong Liu
  • , Tianyi Wu
  • , Yong Li
  • *此作品的通讯作者
  • Tsinghua University
  • Beijing Jiaotong University

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

Spark-assisted chemical engraving (SACE) is suitable to machine hard and brittle insulating materials such as quartz glass; however, the processing efficiency is quite low for achieving good machining quality. In this research, a scanning process of ultrasonic vibration-assisted SACE (UV-SACE) is proposed for high-efficiency processing on quartz glass without surface microcracks. For revealing the microscope mechanism under different vibration amplitudes, a high-speed camera is used to observe the motion of micro bubbles, morphology of gas films, and instantaneous discharges. Then through the processing experiments with two-factor coupling effect of feed rate and vibration amplitude, it is found that the cutting depth is significantly affected by feed rate due to the effect of ultrasonic vibration. The optimal input conditions are obtained by using the NSGA-II optimization method. Furthermore, the removal mechanism of UV-SACE scanning process on quartz is analyzed and applied: Lower feed rate (scanning speed) as the fully discharging case can improve the material removal rate (MRR), while higher feed rate as the insufficient discharging case can improve the processing accuracy and surface quality. Machining experiments verified the proposed mechanism and the optimized process.

源语言英语
页(从-至)1474-1482
页数9
期刊Materials and Manufacturing Processes
卷37
期12
DOI
出版状态已出版 - 2022
已对外发布是

学术指纹

探究 'SACE scanning process assisted with ultrasonic vibration on quartz glass' 的科研主题。它们共同构成独一无二的学术指纹。

引用此