跳到主要导航 跳到搜索 跳到主要内容

Research on the construction method of mechanical model for micro-hole drilling based on compression characteristics of contact area

  • Kuikui Feng
  • , Jianyu Long*
  • , Faping Zhang
  • , Chuan Li
  • , Zhenhe Wu
  • , Mengdi Zhang
  • , Biao Wang
  • *此作品的通讯作者
  • Dongguan University of Technology
  • Beijing Institute of Technology

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

The neglect of the compression deformation of the tool-workpiece contact area in the process of micro-hole drilling leads to the low precision of the mechanical model, which brings great challenges to the accurate characterization of the cutting force. Aiming at the above problems, this paper proposes a construction method of drilling mechanics model based on compression characteristics of contact area, and evaluates the credibility of the model. Firstly, according to the characteristics of the drill tool, the drilling process is decomposed, and the calculation method of cutting force of cutting unit is proposed. Then, according to the change rule of cutting force under the action of multi-cutting mechanisms, the influence mechanism of the cutting unit on the elastic deformation of the contact surface is studied, the main parameter affecting cutting force (undeformed chip thickness, UCT) is modified, the judgment criterion of different cutting mechanism is defined, so as to construct the more accurate mechanical prediction model. Finally, the credibility of the original model without considering compression deformation and the modified model with considering compression deformation is evaluated by the maximum entropy spectrum estimation method. The results show that compared with the original model, the credibility of the modified model for predicting axial thrust and torque is increased by 7.1 % and 5.8 %, respectively, which proves the applicability of the proposed method.

源语言英语
页(从-至)1404-1422
页数19
期刊Journal of Manufacturing Processes
卷131
DOI
出版状态已出版 - 12 12月 2024

学术指纹

探究 'Research on the construction method of mechanical model for micro-hole drilling based on compression characteristics of contact area' 的科研主题。它们共同构成独一无二的学术指纹。

引用此