跳到主要导航 跳到搜索 跳到主要内容

Microstructure and mechanical properties of TA15/TC11 graded structural material by wire arc additive manufacturing process

  • He WANG
  • , Shu yuan MA
  • , Jia chen WANG
  • , Tao LU
  • , Chang meng LIU*
  • *此作品的通讯作者
  • Beijing Institute of Technology

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

A graded structural material (GSM) with a material transition from TA15 to TC11 was fabricated by wire arc additive manufacturing (WAAM) method. The grain morphology, chemical composition, microstructure and mechanical properties of the as-deposited GSM were all characterized to investigate their variations along the deposition direction. The results indicate that from TA15 to TC11, the grain size decreases and a transition from columnar grains to equiaxed grains occurs. The content of alloy element alters greatly within a short distance, and the width of the mutation zone is 800 μm. Both TA15 and TC11 regions exhibit basketweave microstructure with α-phase and β-phase. However, during the transition from TA15 to TC11, the α-lath becomes fine, which leads to an increase in microhardness. The tensile test shows that the bonding strength at the interface is higher than the longitudinal strength of TA15, and the lateral elongation at the interface is higher than that of TA15 and TC11.

源语言英语
页(从-至)2323-2335
页数13
期刊Transactions of Nonferrous Metals Society of China (English Edition)
卷31
期8
DOI
出版状态已出版 - 8月 2021

学术指纹

探究 'Microstructure and mechanical properties of TA15/TC11 graded structural material by wire arc additive manufacturing process' 的科研主题。它们共同构成独一无二的学术指纹。

引用此