Manoeuvring target detection in over-the-horizon radar using adaptive clutter rejection and adaptive chirplet transform

In over-the-horizon radar (OTHR) systems, the signal-to-clutter ratio (SCR) used for moving target detection is very low. For slowly moving targets such as ships, the SCR is typically from - 50 dB to - 60 dB and their Doppler frequencies are close to that of the clutter. For manoeuvring targets, such as aircraft and missiles, the Doppler frequencies are time-varying when a long integration time is considered. When a target does not move uniformly, the Fourier transform based target detection techniques, including super-resolution spectrum techniques, may fail to work appropriately. In such situations, the Doppler signatures are time-varying and, therefore, time-frequency analysis techniques can be used for manoeuvring target detection. In addition, clutter rejection is also required for target detection due to the low SCR. The existing adaptive clutter rejection algorithms combine clutter rejection with spectrum analysis methods, which usually assume uniformly moving target (i.e. sinusoidal Doppler signature) models. An adaptive clutter reject algorithm is proposed together with the adaptive chirplet transform technique for manoeuvring target detection in a multipath environment. Simulation results using a simulated manoeuvring target signal with received raw OTHR clutter data show that targets with SCR below - 50 dB can be detected by using the proposed algorithm.