TY - JOUR
T1 - Influence of support structure on the performance of an aft-pintle variable thrust solid rocket motor
AU - Li, Chunjie
AU - Guo, Yifei
AU - Yang, Hang
AU - Yao, Haoyu
AU - Mei, Kai
AU - Wang, Qi
AU - Li, Xiang
AU - Li, Junwei
N1 - Publisher Copyright:
© 2026 Elsevier Masson SAS.
PY - 2027/1
Y1 - 2027/1
N2 - An aft-pintle variable thrust solid motor was designed, and thrust modulation ignition experiments were conducted, achieving a maximum thrust modulation ratio of 13.4:1 and a pressure modulation ratio of 32.2:1. A numerical model of the internal flow field is established, and the computed thrust results agree well with the experimental data, with a deviation of no more than 5%. The flow field and thrust loss characteristics at different pintle positions are compared, revealing that as the pintle moves away from the throat, the operating pressure gradually decreases and the thrust loss increases. Due to the obstruction of the support rods, complex flow phenomena such as bow shocks, flow separation, recirculation, and flow around the pintle occur in the flow field, severely affecting the motor’s thrust efficiency. Simulation results indicate that the thrust loss mainly originates from the blocking effect of the support rod structure on the high-speed combustion gas. Further parametric studies on the support rod configuration reveal that the number of support rods has only a limited influence on thrust (within 5%), primarily affecting the size and local velocity of the recirculation region and the extent of the separated flow region. Although increasing the exhaust channel diameter weakens the compression of the core region by the jet shear layer, it leads to over-expansion losses and thus reduces thrust. The width of the support rod is identified as the dominant factor among the investigated geometric parameters affecting thrust loss. Reducing the support rod width results in less deformation and interaction of the bow shock structures and reduced compression of the high-speed jet core, while also decreasing the load on the support rod. Compared with the baseline configuration, the thrust increases by 14.2% and 23.6% for configurations with a 6 mm-wide support rod and no support rod, respectively. Adopting a wedge-shaped support rod design effectively enhances thrust, resulting in an increase of approximately 12.9% after optimization.
AB - An aft-pintle variable thrust solid motor was designed, and thrust modulation ignition experiments were conducted, achieving a maximum thrust modulation ratio of 13.4:1 and a pressure modulation ratio of 32.2:1. A numerical model of the internal flow field is established, and the computed thrust results agree well with the experimental data, with a deviation of no more than 5%. The flow field and thrust loss characteristics at different pintle positions are compared, revealing that as the pintle moves away from the throat, the operating pressure gradually decreases and the thrust loss increases. Due to the obstruction of the support rods, complex flow phenomena such as bow shocks, flow separation, recirculation, and flow around the pintle occur in the flow field, severely affecting the motor’s thrust efficiency. Simulation results indicate that the thrust loss mainly originates from the blocking effect of the support rod structure on the high-speed combustion gas. Further parametric studies on the support rod configuration reveal that the number of support rods has only a limited influence on thrust (within 5%), primarily affecting the size and local velocity of the recirculation region and the extent of the separated flow region. Although increasing the exhaust channel diameter weakens the compression of the core region by the jet shear layer, it leads to over-expansion losses and thus reduces thrust. The width of the support rod is identified as the dominant factor among the investigated geometric parameters affecting thrust loss. Reducing the support rod width results in less deformation and interaction of the bow shock structures and reduced compression of the high-speed jet core, while also decreasing the load on the support rod. Compared with the baseline configuration, the thrust increases by 14.2% and 23.6% for configurations with a 6 mm-wide support rod and no support rod, respectively. Adopting a wedge-shaped support rod design effectively enhances thrust, resulting in an increase of approximately 12.9% after optimization.
KW - Bow shock
KW - Flow separation
KW - Pintle variable thrust motor
KW - Support structure
KW - Thrust loss
UR - https://www.scopus.com/pages/publications/105051717631
U2 - 10.1016/j.ast.2026.113853
DO - 10.1016/j.ast.2026.113853
M3 - Article
AN - SCOPUS:105051717631
SN - 1270-9638
VL - 180
JO - Aerospace Science and Technology
JF - Aerospace Science and Technology
M1 - 113853
ER -