TY - JOUR
T1 - High-activity Al-Mg alloy fuels
T2 - An effective approach for enhancing energy release in metallized explosives
AU - Yao, Jie
AU - Xu, Yilong
AU - Liu, Junhui
AU - Wang, Zheng
AU - Yang, Fengyou
AU - Yan, Shi
AU - Guo, Xueyong
N1 - Publisher Copyright:
© 2026 Published by Elsevier Inc. on behalf of The Combustion Institute.
PY - 2026/10
Y1 - 2026/10
N2 - This study systematically investigates the application potential and mechanistic role of Al–Mg alloy fuels in explosive formulations, aiming to markedly enhance the energy output characteristics and overall damage efficiency of metallized explosives. High-activity Al-Mg alloy fuels with Mg contents of 3% and 6% were successfully prepared. The prepared alloy fuel is spherical, with a uniform particle size distribution, and a heterogeneous composite oxide layer formed on the surface. High-activity Al-Mg alloy fuel exhibits a lower initial oxidation temperature and higher oxidation weight gain compared with conventional Al powder. The results of transient high temperature reaction show that the pressure rate of the composite material using the alloy fuel is increased by about 5.82 MPa·s–1 and 10.77 MPa·s–1, respectively, compared with that of traditional Al powder. Combined with molecular dynamics simulation, the microscopic mechanism of the “micro-explosion” phenomenon of high-activity Al-Mg alloy under transient high temperature conditions is revealed for the first time. Furthermore, through multi-spectral combustion diagnosis and detonation performance analysis, it is observed that the high-activity Al-Mg alloy fuel shows more effective synergistic reaction characteristics with oxidizing components (such as AP, CL-20). After incorporation into the metallized explosive system, the system still maintains good storage stability. The distinctive “micro-detonation” combustion behavior and synergistic interaction of the “metal/oxide component” considerably improve the completeness and reaction efficiency of the secondary combustion process during the later stage of detonation. Important parameters, including explosion heat, detonation velocity, and near-field (5–9 m) shock wave overpressure of the explosive, are effectively increased. In particular, the maximum enhancement in explosion heat reaches approximately 250 kJ/kg, while the detonation velocity shows an increase of about 130 m/s. The present study therefore offers a relevant material foundation and theoretical reference for the design and development of next-generation high-energy metallized explosives.
AB - This study systematically investigates the application potential and mechanistic role of Al–Mg alloy fuels in explosive formulations, aiming to markedly enhance the energy output characteristics and overall damage efficiency of metallized explosives. High-activity Al-Mg alloy fuels with Mg contents of 3% and 6% were successfully prepared. The prepared alloy fuel is spherical, with a uniform particle size distribution, and a heterogeneous composite oxide layer formed on the surface. High-activity Al-Mg alloy fuel exhibits a lower initial oxidation temperature and higher oxidation weight gain compared with conventional Al powder. The results of transient high temperature reaction show that the pressure rate of the composite material using the alloy fuel is increased by about 5.82 MPa·s–1 and 10.77 MPa·s–1, respectively, compared with that of traditional Al powder. Combined with molecular dynamics simulation, the microscopic mechanism of the “micro-explosion” phenomenon of high-activity Al-Mg alloy under transient high temperature conditions is revealed for the first time. Furthermore, through multi-spectral combustion diagnosis and detonation performance analysis, it is observed that the high-activity Al-Mg alloy fuel shows more effective synergistic reaction characteristics with oxidizing components (such as AP, CL-20). After incorporation into the metallized explosive system, the system still maintains good storage stability. The distinctive “micro-detonation” combustion behavior and synergistic interaction of the “metal/oxide component” considerably improve the completeness and reaction efficiency of the secondary combustion process during the later stage of detonation. Important parameters, including explosion heat, detonation velocity, and near-field (5–9 m) shock wave overpressure of the explosive, are effectively increased. In particular, the maximum enhancement in explosion heat reaches approximately 250 kJ/kg, while the detonation velocity shows an increase of about 130 m/s. The present study therefore offers a relevant material foundation and theoretical reference for the design and development of next-generation high-energy metallized explosives.
KW - Energy output characteristics
KW - High-activity Al-Mg alloy fuel
KW - Metallized explosives
KW - Micro explosion
KW - Secondary combustion reaction
UR - https://www.scopus.com/pages/publications/105046715715
U2 - 10.1016/j.combustflame.2026.115243
DO - 10.1016/j.combustflame.2026.115243
M3 - Article
AN - SCOPUS:105046715715
SN - 0010-2180
VL - 292
JO - Combustion and Flame
JF - Combustion and Flame
M1 - 115243
ER -