Ground filtering algorithm for mobile LIDAR using order and neighborhood point information

Purpose: Most of the existing ground filtering algorithms are based on the Cartesian coordinate system, which is not compatible with the working principle of mobile light detection and ranging and difficult to obtain good filtering accuracy. The purpose of this paper is to improve the accuracy of ground filtering by making full use of the order information between the point and the point in the spherical coordinate. Design/methodology/approach: First, the cloth simulation (CS) algorithm is modified into a sorting algorithm for scattered point clouds to obtain the adjacent relationship of the point clouds and to generate a matrix containing the adjacent information of the point cloud. Then, according to the adjacent information of the points, a projection distance comparison and local slope analysis are simultaneously performed. These results are integrated to process the point cloud details further and the algorithm is finally used to filter a point cloud in a scene from the KITTI data set. Findings: The results show that the accuracy of KITTI point cloud sorting is 96.3% and the kappa coefficient of the ground filtering result is 0.7978. Compared with other algorithms applied to the same scene, the proposed algorithm has higher processing accuracy. Research limitations/implications: Steps of the algorithm are parallel computing, which saves time owing to the small amount of computation. In addition, the generality of the algorithm is improved and it could be used for different data sets from urban streets. However, due to the lack of point clouds from the field environment with labeled ground points, the filtering result of this algorithm in the field environment needs further study. Originality/value: In this study, the point cloud neighboring information was obtained by a modified CS algorithm. The ground filtering algorithm distinguish ground points and off-ground points according to the flatness, continuity and minimality of ground points in point cloud data. In addition, it has little effect on the algorithm results if thresholds were changed.