Fabrication of screen printed optoelectronic CdS/CdTe device

S. Naseem; Afifa Sadaqat; Ali Imran; Jianliang Jiang; M. Khalid Khan

doi:10.1117/12.2193560

Fabrication of screen printed optoelectronic CdS/CdTe device

S. Naseem
, Afifa Sadaqat
, Ali Imran
, Jianliang Jiang
, M. Khalid Khan

University of the Punjab
Beijing Institute of Technology

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

II-VI semiconductors have great importance in the fabrication and application of optoelectronic devices. CdTe is one of the most promising materials among photovoltaic materials. In this research work CdS/CdTe solar cell has been prepared using screen printing and sintering technique. Various factors affecting the surface morphology of CdS window layer were also investigated. Optical Microscopy, Scanning Electron Microscopy and Electrical characterization proved that best results can be achieved by increasing the sintering duration, the Mesh number and by CdCl₂ doping. CdS/CdTe solar cell with an area of 8.8 cm² was prepared. The Fill Factor was calculated to be 0.51, with Voc = 0.56 V and I_sc=31.5 mA. The efficiency was also measured and found to be 1.02%.

源语言	英语
主期刊名	2015 International Conference on Optical Instruments and Technology
主期刊副标题	Micro/Nano Photonics and Fabrication, OIT 2015
编辑	Pavel Cheben, Zhiping Zhou, Changhe Zhou
出版商	SPIE
ISBN（电子版）	9781628418057
DOI	https://doi.org/10.1117/12.2193560
出版状态	已出版 - 2015
已对外发布	是
活动	2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015 - Beijing, 中国期限: 17 5月 2015 → 19 5月 2015

出版系列

姓名	Proceedings of SPIE - The International Society for Optical Engineering
卷	9624
ISSN（印刷版）	0277-786X
ISSN（电子版）	1996-756X

会议

会议	2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015
国家/地区	中国
市	Beijing
时期	17/05/15 → 19/05/15

联合国可持续发展目标

此成果有助于实现下列可持续发展目标：

可持续发展目标 7 经济适用的清洁能源

访问文件

10.1117/12.2193560

其它文件与链接

链接到 Scopus 的出版物

引用此

Naseem, S., Sadaqat, A., Imran, A., Jiang, J., & Khan, M. K. (2015). Fabrication of screen printed optoelectronic CdS/CdTe device. 在 P. Cheben, Z. Zhou, & C. Zhou (编辑), 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015 文章 96240H (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9624). SPIE. https://doi.org/10.1117/12.2193560

@inproceedings{640d38536c4b4d9a880c4d48aa29f5f5,

title = "Fabrication of screen printed optoelectronic CdS/CdTe device",

abstract = "II-VI semiconductors have great importance in the fabrication and application of optoelectronic devices. CdTe is one of the most promising materials among photovoltaic materials. In this research work CdS/CdTe solar cell has been prepared using screen printing and sintering technique. Various factors affecting the surface morphology of CdS window layer were also investigated. Optical Microscopy, Scanning Electron Microscopy and Electrical characterization proved that best results can be achieved by increasing the sintering duration, the Mesh number and by CdCl2 doping. CdS/CdTe solar cell with an area of 8.8 cm2 was prepared. The Fill Factor was calculated to be 0.51, with Voc = 0.56 V and Isc=31.5 mA. The efficiency was also measured and found to be 1.02\%.",

keywords = "Optoelectronics, Screen printing, Sintering, Solar Cell",

author = "S. Naseem and Afifa Sadaqat and Ali Imran and Jianliang Jiang and Khan, \{M. Khalid\}",

note = "Publisher Copyright: {\textcopyright} 2015 SPIE.; 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015 ; Conference date: 17-05-2015 Through 19-05-2015",

year = "2015",

doi = "10.1117/12.2193560",

language = "English",

series = "Proceedings of SPIE - The International Society for Optical Engineering",

publisher = "SPIE",

editor = "Pavel Cheben and Zhiping Zhou and Changhe Zhou",

booktitle = "2015 International Conference on Optical Instruments and Technology",

address = "United States",

}

Naseem, S, Sadaqat, A, Imran, A, Jiang, J & Khan, MK 2015, Fabrication of screen printed optoelectronic CdS/CdTe device. 在 P Cheben, Z Zhou & C Zhou (编辑), 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015., 96240H, Proceedings of SPIE - The International Society for Optical Engineering, 卷 9624, SPIE, 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015, Beijing, 中国, 17/05/15. https://doi.org/10.1117/12.2193560

Fabrication of screen printed optoelectronic CdS/CdTe device. / Naseem, S.; Sadaqat, Afifa; Imran, Ali 等.
2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015. 编辑 / Pavel Cheben; Zhiping Zhou; Changhe Zhou. SPIE, 2015. 96240H (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9624).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Fabrication of screen printed optoelectronic CdS/CdTe device

AU - Naseem, S.

AU - Sadaqat, Afifa

AU - Imran, Ali

AU - Jiang, Jianliang

AU - Khan, M. Khalid

PY - 2015

Y1 - 2015

N2 - II-VI semiconductors have great importance in the fabrication and application of optoelectronic devices. CdTe is one of the most promising materials among photovoltaic materials. In this research work CdS/CdTe solar cell has been prepared using screen printing and sintering technique. Various factors affecting the surface morphology of CdS window layer were also investigated. Optical Microscopy, Scanning Electron Microscopy and Electrical characterization proved that best results can be achieved by increasing the sintering duration, the Mesh number and by CdCl2 doping. CdS/CdTe solar cell with an area of 8.8 cm2 was prepared. The Fill Factor was calculated to be 0.51, with Voc = 0.56 V and Isc=31.5 mA. The efficiency was also measured and found to be 1.02%.

AB - II-VI semiconductors have great importance in the fabrication and application of optoelectronic devices. CdTe is one of the most promising materials among photovoltaic materials. In this research work CdS/CdTe solar cell has been prepared using screen printing and sintering technique. Various factors affecting the surface morphology of CdS window layer were also investigated. Optical Microscopy, Scanning Electron Microscopy and Electrical characterization proved that best results can be achieved by increasing the sintering duration, the Mesh number and by CdCl2 doping. CdS/CdTe solar cell with an area of 8.8 cm2 was prepared. The Fill Factor was calculated to be 0.51, with Voc = 0.56 V and Isc=31.5 mA. The efficiency was also measured and found to be 1.02%.

KW - Optoelectronics

KW - Screen printing

KW - Sintering

KW - Solar Cell

UR - https://www.scopus.com/pages/publications/84943384807

U2 - 10.1117/12.2193560

DO - 10.1117/12.2193560

M3 - Conference contribution

AN - SCOPUS:84943384807

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - 2015 International Conference on Optical Instruments and Technology

A2 - Cheben, Pavel

A2 - Zhou, Zhiping

A2 - Zhou, Changhe

PB - SPIE

T2 - 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015

Y2 - 17 May 2015 through 19 May 2015

ER -

Naseem S, Sadaqat A, Imran A, Jiang J, Khan MK. Fabrication of screen printed optoelectronic CdS/CdTe device. 在 Cheben P, Zhou Z, Zhou C, 编辑, 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, OIT 2015. SPIE. 2015. 96240H. (Proceedings of SPIE - The International Society for Optical Engineering). doi: 10.1117/12.2193560

Fabrication of screen printed optoelectronic CdS/CdTe device

摘要

出版系列

会议

联合国可持续发展目标

访问文件

其它文件与链接

指纹

引用此