TY - JOUR
T1 - Effects of leakage-induced concentration non-uniformity on vented methane deflagrations in a large-scale confined space
AU - Xiu, Zihao
AU - Liu, Zhenyi
AU - Liu, Qiqi
AU - Li, Mingzhi
AU - Li, Pengliang
N1 - Publisher Copyright:
© 2026
PY - 2027/1
Y1 - 2027/1
N2 - Leakage-induced concentration non-uniformity is common in confined methane releases, but its effects on vented deflagration overpressure and flame evolution remain insufficiently quantified. This study investigated how leakage height controls methane concentration distribution and how the resulting non-uniformity affects vented methane deflagration. A large-scale confined-space experimental system was used to measure concentration fields, pressure histories and flame propagation. Leakage heights of 0.1, 1.0, 1.5, 2.0 and 2.5 m were tested. The coefficient of variation was used to quantify concentration non-uniformity and classify the mixture states. The results show that leakage height strongly controls methane concentration gradients. Low-level leakage promoted upward filling and produced a nearly uniform mixture, whereas high-level leakage caused methane accumulation near the ceiling and delayed the formation of a combustible mixture at the ignition height. Under the present experimental conditions, the non-uniform leakage scenarios generally exhibited lower peak overpressures and external flame velocities than the homogeneous case. However, under the extremely non-uniform conditions tested, combustion instability produced pressure oscillations approaching the acoustic natural frequencies of the enclosure. Under non-uniform conditions, peak external flame velocities were 9-16 m/s, more than 80% lower than that under uniform central ignition. An empirical model for maximum external flame length was further developed using vent pressure, vent area and enclosure volume. These findings support leakage-scenario assessment and vented-flame hazard-distance estimation in large confined spaces.
AB - Leakage-induced concentration non-uniformity is common in confined methane releases, but its effects on vented deflagration overpressure and flame evolution remain insufficiently quantified. This study investigated how leakage height controls methane concentration distribution and how the resulting non-uniformity affects vented methane deflagration. A large-scale confined-space experimental system was used to measure concentration fields, pressure histories and flame propagation. Leakage heights of 0.1, 1.0, 1.5, 2.0 and 2.5 m were tested. The coefficient of variation was used to quantify concentration non-uniformity and classify the mixture states. The results show that leakage height strongly controls methane concentration gradients. Low-level leakage promoted upward filling and produced a nearly uniform mixture, whereas high-level leakage caused methane accumulation near the ceiling and delayed the formation of a combustible mixture at the ignition height. Under the present experimental conditions, the non-uniform leakage scenarios generally exhibited lower peak overpressures and external flame velocities than the homogeneous case. However, under the extremely non-uniform conditions tested, combustion instability produced pressure oscillations approaching the acoustic natural frequencies of the enclosure. Under non-uniform conditions, peak external flame velocities were 9-16 m/s, more than 80% lower than that under uniform central ignition. An empirical model for maximum external flame length was further developed using vent pressure, vent area and enclosure volume. These findings support leakage-scenario assessment and vented-flame hazard-distance estimation in large confined spaces.
KW - Flame evolution
KW - Large-scale confined space
KW - Methane
KW - Non-uniform concentration distribution
KW - Vented deflagration overpressure
UR - https://www.scopus.com/pages/publications/105051768299
U2 - 10.1016/j.jlp.2026.106197
DO - 10.1016/j.jlp.2026.106197
M3 - Article
AN - SCOPUS:105051768299
SN - 0950-4230
VL - 105
JO - Journal of Loss Prevention in the Process Industries
JF - Journal of Loss Prevention in the Process Industries
M1 - 106197
ER -