TY - JOUR
T1 - Effect of V-shaped geometries on the electrothermal response and burst behavior of Ni–Cr thin-film bridge chips
AU - Tang, Xinyue
AU - Zhao, Wanjun
AU - Jiao, Qingjie
AU - Zhu, Yanli
AU - Li, Shaoyang
N1 - Publisher Copyright:
Copyright © 2026. Published by Elsevier B.V.
PY - 2026/12
Y1 - 2026/12
N2 - Ni–Cr thin-film bridge chips are electrothermal devices whose transient response is strongly influenced by bridge geometry. In this work, the electrothermal characteristics of Ni–Cr thin-film bridge chips with different V-shaped geometries were systematically investigated. Four bridge configurations with V-shaped angles of 180°, 150°, 120°, and 90° were fabricated under controlled electrical and dimensional conditions, where the initial bridge resistance and bridge length were kept identical to investigate the influence of V-shaped geometric variation on transient electrothermal behavior. Electrothermal simulations using COMSOL Multiphysics were performed to investigate how V-shaped geometric variation affects hotspot formation at the V-shaped corner and the early-stage temperature-rise rate under the investigated excitation condition. Short-pulse constant-current experiments were conducted to obtain voltage–time traces that capture the bridge burst process. Based on these results, a simulation-based burst time metric t e,sim was extracted from the global maximum temperature history using a predefined temperature-threshold criterion for comparative analysis, and the experimental burst time t e was obtained from the onset of the abrupt resistance jump in the voltage–time traces. Both simulations and experiments show that reducing the V-shaped geometric variation affects the burst time, and the measured t e exhibits a consistent trend with t e,sim within a limited deviation. Under the investigated material system, excitation condition, and dimensional range, t e decreases as the V-shaped geometric constriction increases from the rectangular bridge configuration to the 90° V-shaped configuration. These results provide experimental insights into the geometry-dependent transient electrothermal response characteristics of Ni–Cr thin-film bridge chips.
AB - Ni–Cr thin-film bridge chips are electrothermal devices whose transient response is strongly influenced by bridge geometry. In this work, the electrothermal characteristics of Ni–Cr thin-film bridge chips with different V-shaped geometries were systematically investigated. Four bridge configurations with V-shaped angles of 180°, 150°, 120°, and 90° were fabricated under controlled electrical and dimensional conditions, where the initial bridge resistance and bridge length were kept identical to investigate the influence of V-shaped geometric variation on transient electrothermal behavior. Electrothermal simulations using COMSOL Multiphysics were performed to investigate how V-shaped geometric variation affects hotspot formation at the V-shaped corner and the early-stage temperature-rise rate under the investigated excitation condition. Short-pulse constant-current experiments were conducted to obtain voltage–time traces that capture the bridge burst process. Based on these results, a simulation-based burst time metric t e,sim was extracted from the global maximum temperature history using a predefined temperature-threshold criterion for comparative analysis, and the experimental burst time t e was obtained from the onset of the abrupt resistance jump in the voltage–time traces. Both simulations and experiments show that reducing the V-shaped geometric variation affects the burst time, and the measured t e exhibits a consistent trend with t e,sim within a limited deviation. Under the investigated material system, excitation condition, and dimensional range, t e decreases as the V-shaped geometric constriction increases from the rectangular bridge configuration to the 90° V-shaped configuration. These results provide experimental insights into the geometry-dependent transient electrothermal response characteristics of Ni–Cr thin-film bridge chips.
KW - Burst time
KW - Current crowding
KW - Electrothermal response
KW - Ni–Cr thin-film bridge chips
KW - V-shaped angle
UR - https://www.scopus.com/pages/publications/105054338454
U2 - 10.1016/j.rineng.2026.113640
DO - 10.1016/j.rineng.2026.113640
M3 - Article
AN - SCOPUS:105054338454
SN - 2590-1230
VL - 32
JO - Results in Engineering
JF - Results in Engineering
M1 - 113640
ER -