跳到主要导航 跳到搜索 跳到主要内容

Effect of build orientation on dynamic compressive behaviour of Ti-6Al-4V alloy fabricated by selective laser melting

  • Beijing Institute of Technology
  • Shantou University
  • Technion-Israel Institute of Technology
  • Beijing Institute of Aeronautical Materials

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

This study presents an experimental investigation on elucidating the influence of build orientation on the microstructure and macroscopic response of the selective laser melted (SLM) Ti-6Al-4V alloy under compressive loading at varying strain rates. Quasi-static (at 0.001 s−1) uniaxial compression and dynamic impact tests (up to 4500 s−1) were carried out on specimens with their building directions either being parallel, diagonal or normal to the loading direction. The initial microstructure, dynamic compression stress–strain response, strain rate sensitivity, strain rate hardening effect, adiabatic temperature rise, and fracture behaviours are discussed. The results show that although the build orientation has a negligible influence upon the adiabatic temperature rise, the yield strength and strain-hardening rate of the SLM Ti-6Al-4V alloy are both build orientation and strain-rate dependent. Fractographic examination of the fragmented specimens under quasi-static and impact loading reveals ductile dimples and smooth surfaces, which indicate the coexistence of both ductile and brittle fractures. Although build orientation barely affects the fracture topology of quasi-static compressed specimens, it has a notable impact on facture morphology for dynamically loaded specimens.

源语言英语
期刊论文编号144440
期刊Materials Science and Engineering: A
卷862
DOI
出版状态已出版 - 18 1月 2023

学术指纹

探究 'Effect of build orientation on dynamic compressive behaviour of Ti-6Al-4V alloy fabricated by selective laser melting' 的科研主题。它们共同构成独一无二的学术指纹。

引用此