Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence

Lin Ma; Yue Wu; Wenjiang Xu; Stephen D. Hammack; Tonghun Lee; Campbell D. Carter

doi:10.1364/AO.55.005310

Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence

Lin Ma^*
, Yue Wu
, Wenjiang Xu
, Stephen D. Hammack
, Tonghun Lee
, Campbell D. Carter

^*此作品的通讯作者

Virginia Polytechnic Institute and State University
University of Illinois at Urbana-Champaign
Air Force Research Laboratory

科研成果: 期刊稿件 › 文章 › 同行评审

29 引用（Scopus）

摘要

The goal of this work was to contrast and compare the 2D and 3D flame topography of a turbulent flame. The 2D measurements were obtained using CH-based (methylidyne radical-based) planar laser-induced fluorescence (PLIF), and the 3D measurements were obtained through a tomographic chemiluminescence (TC) technique. Both PLIF and TC were performed simultaneously on a turbulent premixed Bunsen flame. The PLIF measurements were then compared to a cross section of the 3D TC measurements, both to provide a validation to the 3D measurements and also to illustrate the differences in flame structures inferred from the 2D and 3D measurements.

源语言	英语
页（从-至）	5310-5315
页数	6
期刊	Applied Optics
卷	55
期	20
DOI	https://doi.org/10.1364/AO.55.005310
出版状态	已出版 - 10 7月 2016
已对外发布	是

访问文件

10.1364/AO.55.005310

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{a187cda44bd042998f2354ca3938f50d,

title = "Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence",

abstract = "The goal of this work was to contrast and compare the 2D and 3D flame topography of a turbulent flame. The 2D measurements were obtained using CH-based (methylidyne radical-based) planar laser-induced fluorescence (PLIF), and the 3D measurements were obtained through a tomographic chemiluminescence (TC) technique. Both PLIF and TC were performed simultaneously on a turbulent premixed Bunsen flame. The PLIF measurements were then compared to a cross section of the 3D TC measurements, both to provide a validation to the 3D measurements and also to illustrate the differences in flame structures inferred from the 2D and 3D measurements.",

author = "Lin Ma and Yue Wu and Wenjiang Xu and Hammack, \{Stephen D.\} and Tonghun Lee and Carter, \{Campbell D.\}",

note = "Publisher Copyright: {\textcopyright} 2016 Optical Society of America.",

year = "2016",

month = jul,

day = "10",

doi = "10.1364/AO.55.005310",

language = "English",

volume = "55",

pages = "5310--5315",

journal = "Applied Optics",

issn = "1559-128X",

publisher = "Optica Publishing Group (formerly OSA)",

number = "20",

}

TY - JOUR

T1 - Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence

AU - Ma, Lin

AU - Wu, Yue

AU - Xu, Wenjiang

AU - Hammack, Stephen D.

AU - Lee, Tonghun

AU - Carter, Campbell D.

PY - 2016/7/10

Y1 - 2016/7/10

N2 - The goal of this work was to contrast and compare the 2D and 3D flame topography of a turbulent flame. The 2D measurements were obtained using CH-based (methylidyne radical-based) planar laser-induced fluorescence (PLIF), and the 3D measurements were obtained through a tomographic chemiluminescence (TC) technique. Both PLIF and TC were performed simultaneously on a turbulent premixed Bunsen flame. The PLIF measurements were then compared to a cross section of the 3D TC measurements, both to provide a validation to the 3D measurements and also to illustrate the differences in flame structures inferred from the 2D and 3D measurements.

AB - The goal of this work was to contrast and compare the 2D and 3D flame topography of a turbulent flame. The 2D measurements were obtained using CH-based (methylidyne radical-based) planar laser-induced fluorescence (PLIF), and the 3D measurements were obtained through a tomographic chemiluminescence (TC) technique. Both PLIF and TC were performed simultaneously on a turbulent premixed Bunsen flame. The PLIF measurements were then compared to a cross section of the 3D TC measurements, both to provide a validation to the 3D measurements and also to illustrate the differences in flame structures inferred from the 2D and 3D measurements.

UR - https://www.scopus.com/pages/publications/84978795812

U2 - 10.1364/AO.55.005310

DO - 10.1364/AO.55.005310

M3 - Article

AN - SCOPUS:84978795812

SN - 1559-128X

VL - 55

SP - 5310

EP - 5315

JO - Applied Optics

JF - Applied Optics

IS - 20

ER -

Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence

摘要

访问文件

其它文件与链接

指纹

引用此