TY - JOUR
T1 - Angle of Attack Effects on Boundary Layer Transition over a Flared Cone–Swept Fin Configuration
AU - Meng, Qingdong
AU - Lei, Juanmian
AU - Wu, Song
AU - Yuan, Chaokai
AU - Yu, Jiang
AU - Zhou, Ling
N1 - Publisher Copyright:
© 2025 by the authors.
PY - 2025/9
Y1 - 2025/9
N2 - In our previous study, the transition behavior of a flared cone–swept fin configuration was investigated under an angle of attack (AoA) of 0°. To further explore the role of AoA in complex three-dimensional geometries with strong fin–body interactions, wind tunnel experiments were conducted at Ma = 9.3, Re = 1.36 × 107/m, with AoA ranging from −6° to 6°. Global surface temperature distributions were obtained using temperature-sensitive paint (TSP), while localized heat flux and pressure fluctuations were captured using thin-film thermocouples and high-frequency pressure sensors. The results show that varying AoA shifts the location of high heat flux between the upper and lower surfaces of the flared cone and induces a switch from streamwise to separation vortices. The windward side exhibits stronger disturbance responses than the leeward side. The junction region between the flared cone and the near-horizontal surface is highly sensitive to AoA variations, consistently exhibiting pronounced second-mode instabilities. These findings provide experimental support for understanding transition mechanisms under the combined effects of shock/boundary layer interaction (SBLI), crossflow, and adverse pressure gradients, with implications for transition prediction and thermal protection system design.
AB - In our previous study, the transition behavior of a flared cone–swept fin configuration was investigated under an angle of attack (AoA) of 0°. To further explore the role of AoA in complex three-dimensional geometries with strong fin–body interactions, wind tunnel experiments were conducted at Ma = 9.3, Re = 1.36 × 107/m, with AoA ranging from −6° to 6°. Global surface temperature distributions were obtained using temperature-sensitive paint (TSP), while localized heat flux and pressure fluctuations were captured using thin-film thermocouples and high-frequency pressure sensors. The results show that varying AoA shifts the location of high heat flux between the upper and lower surfaces of the flared cone and induces a switch from streamwise to separation vortices. The windward side exhibits stronger disturbance responses than the leeward side. The junction region between the flared cone and the near-horizontal surface is highly sensitive to AoA variations, consistently exhibiting pronounced second-mode instabilities. These findings provide experimental support for understanding transition mechanisms under the combined effects of shock/boundary layer interaction (SBLI), crossflow, and adverse pressure gradients, with implications for transition prediction and thermal protection system design.
KW - angle of attack
KW - hypersonic boundary layer transition
KW - second-mode instabilities
KW - shock–boundary layer interaction
UR - https://www.scopus.com/pages/publications/105017228181
U2 - 10.3390/aerospace12090824
DO - 10.3390/aerospace12090824
M3 - Article
AN - SCOPUS:105017228181
SN - 2226-4310
VL - 12
JO - Aerospace
JF - Aerospace
IS - 9
M1 - 824
ER -