A new multibody system approach for tire modeling using ANCF finite elements

This paper introduces a new computational multibody system framework for developing accurate tire models using the finite element absolute nodal coordinate formulation (ANCF). Absolute nodal coordinate formulation finite elements are used to create the geometry and perform the finite element/multibody system analysis of the tires. The computational procedure used in this study allows for modeling composite tires and for using a continuum-based air pressure and contact tire force models. The absolute nodal coordinate formulation tire mesh, which allows for high spinning speed, has a constant inertia matrix and zero Coriolis and centrifugal forces. The concept of the absolute nodal coordinate formulation reference node, introduced recently, is used to develop linear connectivity conditions between the tire tread and rim, thereby allowing for imposing these linear conditions at a preprocessing stage. Using this approach, the dependent variables are eliminated at a preprocessing stage before the start of the simulation. The reference node, which is not associated with a particular finite element, is used to define the inertia of the rigid rims. The inertia coefficients associated with the rim reference nodes are first developed in terms of the absolute nodal coordinate formulation position and gradient coordinates. The rigidity of each rim is enforced during the dynamic analysis using six nonlinear algebraic constraint equations that are combined with the dynamic differential equations of motion using the technique of Lagrange multipliers. It is shown in this investigation that the concept of the absolute nodal coordinate formulation reference node can be used to develop a complete vehicle model using one absolute nodal coordinate formulation mesh in which the redundant variables are systematically eliminated at a preprocessing stage, and consequently, the number of differential and algebraic equations that need to be solved is significantly reduced. The use of the new approach proposed in this paper is demonstrated using a vehicle model described by one absolute nodal coordinate formulation mesh.