Abstract
In this paper, a stability boundary reconstruction-based assistance control method is proposed for distributed drive electric vehicles under tire blowout conditions. To suppress blowout-induced disturbances on driver’s maneuvers, a tire blowout stability compensation controller is first designed to improve system response speed. Then a dynamic steering angle-vehicle speed constraint controller based on stability boundary is developed to balance driver intention and vehicle stability while fully responding to driver’s inputs. A linear parameter-varying and linear quadratic regulator is formulated to enhance control robustness. Leveraging real-time vehicle state information, a rim-contact-index-guided torque and steering angle distribution strategy is developed to enable optimal allocation of front-wheel steering angle and wheel driving torques under tire blowout conditions. Finally, Hardware-in-the-Loop tests under high-speed straight-line driving and single-lane change scenarios are conducted to verify the effectiveness of the proposed control scheme. The results show that in the single-lane-change braking scenario, the proposed scheme reduces the peak yaw rate by 38.88% and 31.55% compared to the traditional direct yaw moment control method and the cooperative control method, respectively, significantly improving the yaw stability of the vehicle after a tire blowout.
| Original language | English |
|---|---|
| Journal | IEEE Transactions on Transportation Electrification |
| DOIs | |
| Publication status | Accepted/In press - 2026 |
| Externally published | Yes |
Keywords
- blowout control
- distributed drive
- dynamic constraint control
- Electric vehicles
- stability boundary reconstruction
Fingerprint
Dive into the research topics of 'Tire Blowout Assistance Control of Distributed Drive Electric Vehicles via Stability Boundary Reconstruction'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver