The use of wireless transmission system in IMU calibration

Xining Yu; Jie Li; Jiang Qiao; Du Ying

doi:10.1109/ISDEA.2010.425

The use of wireless transmission system in IMU calibration

Xining Yu^*, Jie Li, Jiang Qiao, Du Ying

^*Corresponding author for this work

North University of China

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In view of the engineering requirements for MEMS inertial devices, by using C8051F020 to build hardware platforms, the calibration of MIMU was completed before used through wireless transmission chip NRF24L01 to transfer experimental data. Data transmission tests were carried out with the designed hardware circuit. The results show that the scheme can achieve real-time data transmission accurately.

Original language	English
Title of host publication	Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010
Publisher	IEEE Computer Society
Pages	762-764
Number of pages	3
ISBN (Print)	9780769542126
DOIs	https://doi.org/10.1109/ISDEA.2010.425
Publication status	Published - 2010
Externally published	Yes

Publication series

Name	Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010
Volume	2

Keywords

Calibration
Inertial device
NRF24L01
Wireless transmission

Access to Document

10.1109/ISDEA.2010.425

Cite this

Yu, X., Li, J., Qiao, J., & Ying, D. (2010). The use of wireless transmission system in IMU calibration. In Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010 (pp. 762-764). Article 5743521 (Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010; Vol. 2). IEEE Computer Society. https://doi.org/10.1109/ISDEA.2010.425

Yu, Xining ; Li, Jie ; Qiao, Jiang et al. / The use of wireless transmission system in IMU calibration. Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010. IEEE Computer Society, 2010. pp. 762-764 (Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010).

@inproceedings{331c0fac0a1f439783f9aa1c76749294,

title = "The use of wireless transmission system in IMU calibration",

abstract = "In view of the engineering requirements for MEMS inertial devices, by using C8051F020 to build hardware platforms, the calibration of MIMU was completed before used through wireless transmission chip NRF24L01 to transfer experimental data. Data transmission tests were carried out with the designed hardware circuit. The results show that the scheme can achieve real-time data transmission accurately.",

keywords = "Calibration, Inertial device, NRF24L01, Wireless transmission",

author = "Xining Yu and Jie Li and Jiang Qiao and Du Ying",

year = "2010",

doi = "10.1109/ISDEA.2010.425",

language = "English",

isbn = "9780769542126",

series = "Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010",

publisher = "IEEE Computer Society",

pages = "762--764",

booktitle = "Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010",

address = "United States",

}

Yu, X, Li, J, Qiao, J & Ying, D 2010, The use of wireless transmission system in IMU calibration. in Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010., 5743521, Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010, vol. 2, IEEE Computer Society, pp. 762-764. https://doi.org/10.1109/ISDEA.2010.425

The use of wireless transmission system in IMU calibration. / Yu, Xining; Li, Jie; Qiao, Jiang et al.
Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010. IEEE Computer Society, 2010. p. 762-764 5743521 (Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010; Vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The use of wireless transmission system in IMU calibration

AU - Yu, Xining

AU - Li, Jie

AU - Qiao, Jiang

AU - Ying, Du

PY - 2010

Y1 - 2010

N2 - In view of the engineering requirements for MEMS inertial devices, by using C8051F020 to build hardware platforms, the calibration of MIMU was completed before used through wireless transmission chip NRF24L01 to transfer experimental data. Data transmission tests were carried out with the designed hardware circuit. The results show that the scheme can achieve real-time data transmission accurately.

AB - In view of the engineering requirements for MEMS inertial devices, by using C8051F020 to build hardware platforms, the calibration of MIMU was completed before used through wireless transmission chip NRF24L01 to transfer experimental data. Data transmission tests were carried out with the designed hardware circuit. The results show that the scheme can achieve real-time data transmission accurately.

KW - Calibration

KW - Inertial device

KW - NRF24L01

KW - Wireless transmission

UR - http://www.scopus.com/inward/record.url?scp=79955758723&partnerID=8YFLogxK

U2 - 10.1109/ISDEA.2010.425

DO - 10.1109/ISDEA.2010.425

M3 - Conference contribution

AN - SCOPUS:79955758723

SN - 9780769542126

T3 - Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010

SP - 762

EP - 764

BT - Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010

PB - IEEE Computer Society

ER -

Yu X, Li J, Qiao J, Ying D. The use of wireless transmission system in IMU calibration. In Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010. IEEE Computer Society. 2010. p. 762-764. 5743521. (Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010). doi: 10.1109/ISDEA.2010.425

The use of wireless transmission system in IMU calibration

Abstract

Publication series

Keywords

Access to Document

Other files and links

Fingerprint

Cite this