The Parametric Casting Process Modeling Method Based on the Topological Entities Naming

Xiaojun Liu; Zhonghua Ni; Xiaoli Qiu; Xiang Li

doi:10.1007/978-981-13-2396-6_3

The Parametric Casting Process Modeling Method Based on the Topological Entities Naming

Xiaojun Liu^*, Zhonghua Ni, Xiaoli Qiu, Xiang Li

^*Corresponding author for this work

Southeast University, Nanjing

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In order to maintain the topological relations for the elements of casting process model and rebuild the casting process correctly when process parameters is changed, the topological entities naming method is used in this paper. Firstly, topological entities naming method, including naming rule for entity ID, Geometry_Name, and Process_Name, is proposed, and the mapping strategy between topological entity name and process information is established. Then, the geometry modeling method for casting process is studied in three steps: (1) process parameter setting method for gating and riser system; (2) parametric modeling procedure for gating and riser system; (3) the 3D process dimension design procedure for gating and riser system. Thirdly, the reconstruction method for parametric casting process model based on topological entity identification is given. A prototype of 3D casting process planning system is developed, and the reconstruction method is tested by an example part.

Original language	English
Title of host publication	Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings
Editors	Shilong Wang, Ming K. Lim, Yuanxin Luo, Rui Chen, Mark Price, Yan Jin
Publisher	Springer Verlag
Pages	22-39
Number of pages	18
ISBN (Print)	9789811323959
DOIs	https://doi.org/10.1007/978-981-13-2396-6_3
Publication status	Published - 2018
Externally published	Yes
Event	1st International Conference on Intelligent Manufacturing and Internet of Things, IMIOT 2018 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018 - Chogqing, China Duration: 21 Sept 2018 → 23 Sept 2018

Publication series

Name	Communications in Computer and Information Science
Volume	923
ISSN (Print)	1865-0929

Conference

Conference	1st International Conference on Intelligent Manufacturing and Internet of Things, IMIOT 2018 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018
Country/Territory	China
City	Chogqing
Period	21/09/18 → 23/09/18

Keywords

Casting process planning
Gating system
Parametric design
Riser system
Topological entities naming

Access to Document

10.1007/978-981-13-2396-6_3

Cite this

Liu, X., Ni, Z., Qiu, X., & Li, X. (2018). The Parametric Casting Process Modeling Method Based on the Topological Entities Naming. In S. Wang, M. K. Lim, Y. Luo, R. Chen, M. Price, & Y. Jin (Eds.), Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings (pp. 22-39). (Communications in Computer and Information Science; Vol. 923). Springer Verlag. https://doi.org/10.1007/978-981-13-2396-6_3

Liu, Xiaojun ; Ni, Zhonghua ; Qiu, Xiaoli et al. / The Parametric Casting Process Modeling Method Based on the Topological Entities Naming. Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings. editor / Shilong Wang ; Ming K. Lim ; Yuanxin Luo ; Rui Chen ; Mark Price ; Yan Jin. Springer Verlag, 2018. pp. 22-39 (Communications in Computer and Information Science).

@inproceedings{d623da495efe42aabe915f5d487ac2e9,

title = "The Parametric Casting Process Modeling Method Based on the Topological Entities Naming",

abstract = "In order to maintain the topological relations for the elements of casting process model and rebuild the casting process correctly when process parameters is changed, the topological entities naming method is used in this paper. Firstly, topological entities naming method, including naming rule for entity ID, Geometry_Name, and Process_Name, is proposed, and the mapping strategy between topological entity name and process information is established. Then, the geometry modeling method for casting process is studied in three steps: (1) process parameter setting method for gating and riser system; (2) parametric modeling procedure for gating and riser system; (3) the 3D process dimension design procedure for gating and riser system. Thirdly, the reconstruction method for parametric casting process model based on topological entity identification is given. A prototype of 3D casting process planning system is developed, and the reconstruction method is tested by an example part.",

keywords = "Casting process planning, Gating system, Parametric design, Riser system, Topological entities naming",

author = "Xiaojun Liu and Zhonghua Ni and Xiaoli Qiu and Xiang Li",

note = "Publisher Copyright: {\textcopyright} Springer Nature Singapore Pte Ltd 2018.; 1st International Conference on Intelligent Manufacturing and Internet of Things, IMIOT 2018 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018 ; Conference date: 21-09-2018 Through 23-09-2018",

year = "2018",

doi = "10.1007/978-981-13-2396-6_3",

language = "English",

isbn = "9789811323959",

series = "Communications in Computer and Information Science",

publisher = "Springer Verlag",

pages = "22--39",

editor = "Shilong Wang and Lim, {Ming K.} and Yuanxin Luo and Rui Chen and Mark Price and Yan Jin",

booktitle = "Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings",

address = "Germany",

}

Liu, X, Ni, Z, Qiu, X & Li, X 2018, The Parametric Casting Process Modeling Method Based on the Topological Entities Naming. in S Wang, MK Lim, Y Luo, R Chen, M Price & Y Jin (eds), Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings. Communications in Computer and Information Science, vol. 923, Springer Verlag, pp. 22-39, 1st International Conference on Intelligent Manufacturing and Internet of Things, IMIOT 2018 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018, Chogqing, China, 21/09/18. https://doi.org/10.1007/978-981-13-2396-6_3

The Parametric Casting Process Modeling Method Based on the Topological Entities Naming. / Liu, Xiaojun; Ni, Zhonghua; Qiu, Xiaoli et al.
Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings. ed. / Shilong Wang; Ming K. Lim; Yuanxin Luo; Rui Chen; Mark Price; Yan Jin. Springer Verlag, 2018. p. 22-39 (Communications in Computer and Information Science; Vol. 923).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The Parametric Casting Process Modeling Method Based on the Topological Entities Naming

AU - Liu, Xiaojun

AU - Ni, Zhonghua

AU - Qiu, Xiaoli

AU - Li, Xiang

N1 - Publisher Copyright: © Springer Nature Singapore Pte Ltd 2018.

PY - 2018

Y1 - 2018

N2 - In order to maintain the topological relations for the elements of casting process model and rebuild the casting process correctly when process parameters is changed, the topological entities naming method is used in this paper. Firstly, topological entities naming method, including naming rule for entity ID, Geometry_Name, and Process_Name, is proposed, and the mapping strategy between topological entity name and process information is established. Then, the geometry modeling method for casting process is studied in three steps: (1) process parameter setting method for gating and riser system; (2) parametric modeling procedure for gating and riser system; (3) the 3D process dimension design procedure for gating and riser system. Thirdly, the reconstruction method for parametric casting process model based on topological entity identification is given. A prototype of 3D casting process planning system is developed, and the reconstruction method is tested by an example part.

AB - In order to maintain the topological relations for the elements of casting process model and rebuild the casting process correctly when process parameters is changed, the topological entities naming method is used in this paper. Firstly, topological entities naming method, including naming rule for entity ID, Geometry_Name, and Process_Name, is proposed, and the mapping strategy between topological entity name and process information is established. Then, the geometry modeling method for casting process is studied in three steps: (1) process parameter setting method for gating and riser system; (2) parametric modeling procedure for gating and riser system; (3) the 3D process dimension design procedure for gating and riser system. Thirdly, the reconstruction method for parametric casting process model based on topological entity identification is given. A prototype of 3D casting process planning system is developed, and the reconstruction method is tested by an example part.

KW - Casting process planning

KW - Gating system

KW - Parametric design

KW - Riser system

KW - Topological entities naming

UR - http://www.scopus.com/inward/record.url?scp=85053887177&partnerID=8YFLogxK

U2 - 10.1007/978-981-13-2396-6_3

DO - 10.1007/978-981-13-2396-6_3

M3 - Conference contribution

AN - SCOPUS:85053887177

SN - 9789811323959

T3 - Communications in Computer and Information Science

SP - 22

EP - 39

BT - Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings

A2 - Wang, Shilong

A2 - Lim, Ming K.

A2 - Luo, Yuanxin

A2 - Chen, Rui

A2 - Price, Mark

A2 - Jin, Yan

PB - Springer Verlag

T2 - 1st International Conference on Intelligent Manufacturing and Internet of Things, IMIOT 2018 and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018

Y2 - 21 September 2018 through 23 September 2018

ER -

Liu X, Ni Z, Qiu X, Li X. The Parametric Casting Process Modeling Method Based on the Topological Entities Naming. In Wang S, Lim MK, Luo Y, Chen R, Price M, Jin Y, editors, Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings. Springer Verlag. 2018. p. 22-39. (Communications in Computer and Information Science). doi: 10.1007/978-981-13-2396-6_3

The Parametric Casting Process Modeling Method Based on the Topological Entities Naming

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this