The Analysis and Research of Driving System Based on CATIA Software

Yunhe Zhang; Faping Zhang; Wuhong Wang; Yi Li; Kai Wu; Tianhui Zhang

doi:10.1109/ITNEC48623.2020.9085148

The Analysis and Research of Driving System Based on CATIA Software

Yunhe Zhang
, Faping Zhang
, Wuhong Wang
, Yi Li
, Kai Wu
, Tianhui Zhang

School of Mechanical Engineering

Beijing Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper, CATIA software was used to establish the three-dimensional model of the transmission belt and the belt wheel for the driving system of the roadbed mobile platform. The dynamic characteristics of the driving system of the roadbed mobile platform were simulated and analyzed. The contact force and tensile stress of the components in the driving system were simulated and analyzed. By the simulation analysis of the driving system, the stress distribution of the driving belt and the belt wheel is given in the running process of the driving system, a digital simulation analysis and design method is provided for the design of the multi-wedge belt and the analysis of the driving performance.

Original language	English
Title of host publication	Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020
Editors	Bing Xu, Kefen Mou
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2692-2695
Number of pages	4
ISBN (Electronic)	9781728143903
DOIs	https://doi.org/10.1109/ITNEC48623.2020.9085148
Publication status	Published - Jun 2020
Event	4th IEEE Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020 - Chongqing, China Duration: 12 Jun 2020 → 14 Jun 2020

Publication series

Name	Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020

Conference

Conference	4th IEEE Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020
Country/Territory	China
City	Chongqing
Period	12/06/20 → 14/06/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

CATIA
simulation analysis
subgrade mobile platform

Access to Document

10.1109/ITNEC48623.2020.9085148

Cite this

Zhang, Y., Zhang, F., Wang, W., Li, Y., Wu, K., & Zhang, T. (2020). The Analysis and Research of Driving System Based on CATIA Software. In B. Xu, & K. Mou (Eds.), Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020 (pp. 2692-2695). Article 9085148 (Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ITNEC48623.2020.9085148

Zhang, Yunhe ; Zhang, Faping ; Wang, Wuhong et al. / The Analysis and Research of Driving System Based on CATIA Software. Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020. editor / Bing Xu ; Kefen Mou. Institute of Electrical and Electronics Engineers Inc., 2020. pp. 2692-2695 (Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020).

@inproceedings{aaf057221ebc45f38171c82fef3d06e3,

title = "The Analysis and Research of Driving System Based on CATIA Software",

abstract = "In this paper, CATIA software was used to establish the three-dimensional model of the transmission belt and the belt wheel for the driving system of the roadbed mobile platform. The dynamic characteristics of the driving system of the roadbed mobile platform were simulated and analyzed. The contact force and tensile stress of the components in the driving system were simulated and analyzed. By the simulation analysis of the driving system, the stress distribution of the driving belt and the belt wheel is given in the running process of the driving system, a digital simulation analysis and design method is provided for the design of the multi-wedge belt and the analysis of the driving performance.",

keywords = "CATIA, simulation analysis, subgrade mobile platform",

author = "Yunhe Zhang and Faping Zhang and Wuhong Wang and Yi Li and Kai Wu and Tianhui Zhang",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 4th IEEE Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020 ; Conference date: 12-06-2020 Through 14-06-2020",

year = "2020",

month = jun,

doi = "10.1109/ITNEC48623.2020.9085148",

language = "English",

series = "Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2692--2695",

editor = "Bing Xu and Kefen Mou",

booktitle = "Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020",

address = "United States",

}

Zhang, Y, Zhang, F , Wang, W, Li, Y, Wu, K & Zhang, T 2020, The Analysis and Research of Driving System Based on CATIA Software. in B Xu & K Mou (eds), Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020., 9085148, Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020, Institute of Electrical and Electronics Engineers Inc., pp. 2692-2695, 4th IEEE Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020, Chongqing, China, 12/06/20. https://doi.org/10.1109/ITNEC48623.2020.9085148

The Analysis and Research of Driving System Based on CATIA Software. / Zhang, Yunhe; Zhang, Faping ; Wang, Wuhong et al.
Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020. ed. / Bing Xu; Kefen Mou. Institute of Electrical and Electronics Engineers Inc., 2020. p. 2692-2695 9085148 (Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The Analysis and Research of Driving System Based on CATIA Software

AU - Zhang, Yunhe

AU - Zhang, Faping

AU - Wang, Wuhong

AU - Li, Yi

AU - Wu, Kai

AU - Zhang, Tianhui

PY - 2020/6

Y1 - 2020/6

N2 - In this paper, CATIA software was used to establish the three-dimensional model of the transmission belt and the belt wheel for the driving system of the roadbed mobile platform. The dynamic characteristics of the driving system of the roadbed mobile platform were simulated and analyzed. The contact force and tensile stress of the components in the driving system were simulated and analyzed. By the simulation analysis of the driving system, the stress distribution of the driving belt and the belt wheel is given in the running process of the driving system, a digital simulation analysis and design method is provided for the design of the multi-wedge belt and the analysis of the driving performance.

AB - In this paper, CATIA software was used to establish the three-dimensional model of the transmission belt and the belt wheel for the driving system of the roadbed mobile platform. The dynamic characteristics of the driving system of the roadbed mobile platform were simulated and analyzed. The contact force and tensile stress of the components in the driving system were simulated and analyzed. By the simulation analysis of the driving system, the stress distribution of the driving belt and the belt wheel is given in the running process of the driving system, a digital simulation analysis and design method is provided for the design of the multi-wedge belt and the analysis of the driving performance.

KW - CATIA

KW - simulation analysis

KW - subgrade mobile platform

UR - https://www.scopus.com/pages/publications/85086254167

U2 - 10.1109/ITNEC48623.2020.9085148

DO - 10.1109/ITNEC48623.2020.9085148

M3 - Conference contribution

AN - SCOPUS:85086254167

T3 - Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020

SP - 2692

EP - 2695

BT - Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020

A2 - Xu, Bing

A2 - Mou, Kefen

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 4th IEEE Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020

Y2 - 12 June 2020 through 14 June 2020

ER -

Zhang Y, Zhang F , Wang W, Li Y, Wu K, Zhang T. The Analysis and Research of Driving System Based on CATIA Software. In Xu B, Mou K, editors, Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 2692-2695. 9085148. (Proceedings of 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2020). doi: 10.1109/ITNEC48623.2020.9085148

The Analysis and Research of Driving System Based on CATIA Software

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this