Skip to main navigation Skip to search Skip to main content

Simultaneous enhancement of strength and ductility of additively manufactured single-phase Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy via oxygen doping with oxidized powder

  • Beijing Institute of Technology
  • BIT
  • Hebei University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

Improving the performance of alloys fabricated by additive manufacturing (AM) through a simple process based on the existing composition is a topic of great interest. In this study, we proposed a strategy of doping oxidized powder to improve the strength and ductility of Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy (LRHEA) fabricated by direct energy deposition (DED), a typical AM method, and systematically investigated the effects of the oxidation degree of doping oxidized powder on the microstructure and mechanical properties of the AM sample. The results show that the oxygen from the oxidized powders was uniformly dissolved in the sample fabricated by doping 50 wt% medium-oxidized powders (oxygen content is 0.32 wt%). The oxygen promoted the formation of local chemical ordering (LCO), increasing its content from 3.6 ± 0.5% to 10.1 ± 1.1%. The yield strength and elongation of the sample increased from 855 ± 11 MPa and 16 ± 1.6% to 1023 ± 15 MPa and 26.7 ± 2.1%, respectively. The increase in strength is mainly attributed to the strengthening effects of interstitial oxygen and LCO, while the improved ductility is attributed to the development of secondary slip bands induced by LCO and the extensive formation of kink bands, which enhance the uniform deformation capability of the alloy. In contrast, although doping with 50 wt% highly-oxidized powder (oxygen content is 0.64 wt%) further increased the yield strength of the sample (1105 ± 21 MPa), significantly reducing the elongation of the sample to 0.8 ± 0.4% owing to the excessively high oxygen content and the formation of defects. This study provides new insights and process strategies for improving the performance of alloys fabricated by AM.

Original languageEnglish
Article number117009
JournalMaterials Characterization
Volume240
DOIs
Publication statusPublished - Oct 2026
Externally publishedYes

Keywords

  • Additive manufacturing
  • Kink band
  • Lightweight refractory high-entropy alloys
  • Local chemical ordering
  • Oxidized powder

Fingerprint

Dive into the research topics of 'Simultaneous enhancement of strength and ductility of additively manufactured single-phase Ti-Zr-V-Nb-Al lightweight refractory high-entropy alloy via oxygen doping with oxidized powder'. Together they form a unique fingerprint.

Cite this