Rethinking Liquid Crystal Tunable Phase Shifter Design with Inverted Microstrip Lines at 1–67 GHz by Dissipative Loss Analysis

Growing 5G/6G phased-array beam-steering applications, for which liquid crystal (LC) is one of the enabling technology candidates, have sparked interest in the modulation of the phase (and amplitude) of microwave and millimeter-wave signals. In this communication, fresh insights into the systematic design analysis of a 1–67 GHz passive inverted microstrip line (IMSL) phase shifter filled with highly anisotropic LC as tunable dielectric media are obtained. Based on waveguide disturbance tests to characterize the dielectric properties of the non-tunable PCB and tunable LC used in the IMSL phase shift device filled with a GT3-24002 LC layer (125 µm thick) partially enclosing a 220 µm wide, 17 µm thick, 1.35 cm long copper core line, a 0–π differential phase shift in the 1–67 GHz range with less than 2 dB insertion loss is reported. Dissipative loss analysis shows that the dielectric absorption of the LC is 21.28% of the input signal power at 60 GHz. Further investigation is performed to quantify the impacts of dielectric substrate thicknesses (PCB and LC) on the wave-occupied volume ratio (and hence the phase tuning range), as well as on dissipative losses (including conductor loss and dielectric loss). Specifically, conductor loss is observed to follow a linear relationship with the reciprocal of the LC thickness.