Skip to main navigation Skip to search Skip to main content

Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-of-freedom model

  • Q. M. Li*
  • , H. Meng
  • *Corresponding author for this work
  • Nanyang Technological University

Research output: Contribution to journal › Article › peer-review

Abstract

Characteristics of a pressure-impulse diagram for blast loads are studied based on a dimensional analysis and a single-degree-of-freedom model. Structural behavior is dominated by the fundamental elastic response mode and the structural damage is controlled by the maximum structural deflection. The blast loading is simplified into a descending pressure pulse. A characteristic curve in nondimensional loading parameter space is used to define an isodamage critical diagram, pressure-impulse diagram, to distinguish damaged and undamaged ranges in the loading parameter space. Three damage regimes on a pressure-impulse diagram, i.e., (I) impulse-controlled damage, (II) peak load and impulse-controlled damage, and (III) peak load-controlled damage, exist respectively for impulsive, dynamic and quasistatic structural response regimes determined by the ratio between loading time and the response period of a structure. It is observed that there is a noticeable loading shape influence on the pressure-impulse diagram in Regime-II when both peak load and impulse are important for dynamic structural response. A unique effective pressure-impulse diagram is proposed to eliminate the pulse loading shape effect on a pressure-impulse diagram.

Original languageEnglish
Pages (from-to)87-92
Number of pages6
JournalJournal of Engineering Mechanics - ASCE
Volume128
Issue number1
DOIs
Publication statusPublished - Jan 2002
Externally publishedYes

Keywords

  • Blast loads
  • Dimensional analysis

Fingerprint

Dive into the research topics of 'Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-of-freedom model'. Together they form a unique fingerprint.

Cite this