Preparation of epoxy resin composites by chitosan modified montmorillonite

Ying Chen; Jing Xie; Shangyue Shen; Ping Jin

doi:10.4028/www.scientific.net/AMR.311-313.113

Preparation of epoxy resin composites by chitosan modified montmorillonite

Ying Chen, Jing Xie^*, Shangyue Shen, Ping Jin

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

OMMT was compounded by MMT and 1% (v/v) acetic acid dissolved chitosan via solution intercalate method, and then prepared the composites with epoxy resin. The change about spacing of montmorillonite was tested by XRD, and the molecular structure of OMMT was tested by Fourier infrared spectrum. The tensile strength and impact strength of epoxy resin composites were also tested. The result showed that the spacing of montmorillonite first increased then decreased along with the increasing mass fraction of chitosan. The maximum value (d ₀₀₁=1.983 nm) appeared when mass fraction of chitosan was 30%. And tensile strength and impact strength were improved by 86.8 and 51.2% respectively.

Original language	English
Title of host publication	Advanced Materials and Processes
Pages	113-116
Number of pages	4
DOIs	https://doi.org/10.4028/www.scientific.net/AMR.311-313.113
Publication status	Published - 2011
Externally published	Yes
Event	2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011 - Guangzhou, China Duration: 16 Sept 2011 → 18 Sept 2011

Publication series

Name	Advanced Materials Research
Volume	311-313
ISSN (Print)	1022-6680

Conference

Conference	2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011
Country/Territory	China
City	Guangzhou
Period	16/09/11 → 18/09/11

Keywords

Chitosan
Epoxy resin composites
Organic montmorillonite

Access to Document

10.4028/www.scientific.net/AMR.311-313.113

Cite this

@inproceedings{8296274793e942edbed7d7bd7118c01f,

title = "Preparation of epoxy resin composites by chitosan modified montmorillonite",

abstract = "OMMT was compounded by MMT and 1\% (v/v) acetic acid dissolved chitosan via solution intercalate method, and then prepared the composites with epoxy resin. The change about spacing of montmorillonite was tested by XRD, and the molecular structure of OMMT was tested by Fourier infrared spectrum. The tensile strength and impact strength of epoxy resin composites were also tested. The result showed that the spacing of montmorillonite first increased then decreased along with the increasing mass fraction of chitosan. The maximum value (d 001=1.983 nm) appeared when mass fraction of chitosan was 30\%. And tensile strength and impact strength were improved by 86.8 and 51.2\% respectively.",

keywords = "Chitosan, Epoxy resin composites, Organic montmorillonite",

author = "Ying Chen and Jing Xie and Shangyue Shen and Ping Jin",

year = "2011",

doi = "10.4028/www.scientific.net/AMR.311-313.113",

language = "English",

isbn = "9783037852149",

series = "Advanced Materials Research",

pages = "113--116",

booktitle = "Advanced Materials and Processes",

note = "2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011 ; Conference date: 16-09-2011 Through 18-09-2011",

}

Chen, Y, Xie, J, Shen, S & Jin, P 2011, Preparation of epoxy resin composites by chitosan modified montmorillonite. in Advanced Materials and Processes. Advanced Materials Research, vol. 311-313, pp. 113-116, 2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, Guangzhou, China, 16/09/11. https://doi.org/10.4028/www.scientific.net/AMR.311-313.113

TY - GEN

T1 - Preparation of epoxy resin composites by chitosan modified montmorillonite

AU - Chen, Ying

AU - Xie, Jing

AU - Shen, Shangyue

AU - Jin, Ping

PY - 2011

Y1 - 2011

N2 - OMMT was compounded by MMT and 1% (v/v) acetic acid dissolved chitosan via solution intercalate method, and then prepared the composites with epoxy resin. The change about spacing of montmorillonite was tested by XRD, and the molecular structure of OMMT was tested by Fourier infrared spectrum. The tensile strength and impact strength of epoxy resin composites were also tested. The result showed that the spacing of montmorillonite first increased then decreased along with the increasing mass fraction of chitosan. The maximum value (d 001=1.983 nm) appeared when mass fraction of chitosan was 30%. And tensile strength and impact strength were improved by 86.8 and 51.2% respectively.

AB - OMMT was compounded by MMT and 1% (v/v) acetic acid dissolved chitosan via solution intercalate method, and then prepared the composites with epoxy resin. The change about spacing of montmorillonite was tested by XRD, and the molecular structure of OMMT was tested by Fourier infrared spectrum. The tensile strength and impact strength of epoxy resin composites were also tested. The result showed that the spacing of montmorillonite first increased then decreased along with the increasing mass fraction of chitosan. The maximum value (d 001=1.983 nm) appeared when mass fraction of chitosan was 30%. And tensile strength and impact strength were improved by 86.8 and 51.2% respectively.

KW - Chitosan

KW - Epoxy resin composites

KW - Organic montmorillonite

UR - https://www.scopus.com/pages/publications/80053045304

U2 - 10.4028/www.scientific.net/AMR.311-313.113

DO - 10.4028/www.scientific.net/AMR.311-313.113

M3 - Conference contribution

AN - SCOPUS:80053045304

SN - 9783037852149

T3 - Advanced Materials Research

SP - 113

EP - 116

BT - Advanced Materials and Processes

T2 - 2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011

Y2 - 16 September 2011 through 18 September 2011

ER -

Preparation of epoxy resin composites by chitosan modified montmorillonite

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this