Modeling of the Dynamics of Conical Separate Plates in a Wet Multi-Disc Clutch

Wet multi-disc clutches in transmission systems suffer from the incomplete separation of the friction components, which raises the drag torque and results in power loss and heightened fuel consumption. This incomplete separation arises from the force imbalance between resistance forces, such as the oil viscosity force, and the lack of an axial separating force. Therefore, providing an axial separating force is a potential solution to this problem. In this investigation, small-angle conical separate plates were designed which can provide the elastic restoring force during the separation process. Based on its structural properties, a model describing the clutch engagement and separation process was established. Through bench tests, the feasibility of the model was verified. The influence of the conical plate on the dynamics of the clutch was studied, including the influence of the separation gap, uniformity, and drag torque. Though the transmitted torque was reduced by 10.31% in the low-piston-pressure condition and by less than 2% in the high-piston-pressure condition, the problem of incomplete separation was successfully resolved. The results show that when applying the conical plates, the separation time was reduced by 18.78%, with a 25.31% increase in the uniformity of the gaps. Accordingly, the drag torque was reduced by 37.73%.