Abstract
High-temperature packed-bed thermal energy storage (TES) for concentrating solar power (CSP) requires storage media that combine high energy density, adequate heat transfer and mechanical reliability under repeated thermal cycling. This study develops spodumene-slag-based ternary sulphate composite phase change materials (CPCMs) for operation up to 800 °C. Mg(OH)₂ and KOH were introduced separately during water-vapour-assisted sintering to regulate in-situ sodium silicate formation and MgO-mediated densification. SP4-M1 containing 1 wt% Mg(OH)₂ achieved a mean fresh-state compressive strength of 183 MPa across four replicate specimens, with a maximum measured value of 218 MPa. SP4-K1 containing 1 wt% KOH achieved the highest total TES density of 1412 J/g, of which approximately 98.8% was contributed by sensible heat. After 100 thermal cycles at 800 °C, the measured compressive strengths of SP4-M1 and SP4-K1 were 126.8 and 132.6 MPa, respectively, both more than twice the MgO brick reference. A first-order 10 MWh packed-bed sizing analysis showed that SP4-K1 reduced the required bed height by 15.1% and storage-material mass by 50.4% relative to MgO brick, while maintaining higher charging efficiency under an idealised diurnal inlet-temperature profile. The results demonstrate a reagent-tunable spodumene-slag platform with two differentiated optimisation routes: SP4-M1 favours fresh-state mechanical strength, whereas SP4-K1 favours TES density and cycling stability. By deliberately regulating in-situ sodium-silicate formation and translating the measured material properties into packed-bed sizing and transient-performance metrics, this work connects composition-level modification with component-level CSP storage benefits; screening estimates further indicate potential raw-material cost and embodied‑carbon advantages.
| Original language | English |
|---|---|
| Article number | 132270 |
| Journal | Applied Thermal Engineering |
| Volume | 304 |
| DOIs | |
| Publication status | Published - Sept 2026 |
| Externally published | Yes |
Keywords
- Composite phase change materials
- Concentrating solar power
- High-temperature thermal energy storage
- Packed-bed TES
- Thermal cycling reliability
- Thermophysical properties
Fingerprint
Dive into the research topics of 'Mechanically reliable, sensible-dominated spodumene-slag composite phase change materials for high-temperature packed-bed CSP storage'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver