Influence of adhesive system on performance of SiO/C lithium-ion battery

Xin Teng; Yusheng Yang; Qi Liu; Hongliang Xu; Lei Wang; Borong Wu; Chuan Wu; Feng Wu

doi:10.1051/matecconf/20153401007

Influence of adhesive system on performance of SiO/C lithium-ion battery

Xin Teng^*
, Yusheng Yang
, Qi Liu
, Hongliang Xu
, Lei Wang
, Borong Wu
, Chuan Wu
, Feng Wu

^*Corresponding author for this work

School of Material Science and Engineering

Beijing Institute of Technology

Research output: Contribution to journal › Conference article › peer-review

Abstract

Silicon based anode material is turning into the research hot point of lithium-ion battery material field due to Si inside supporting higher capacity. Furthermore binder applied as major accessory material of anode system could bring anode material & current collector together, thus the influence given by binder system to battery performance becomes the key point. The paper describes the procedure of adopting commercial LiCoO₂, SiO/C as composite material & electrolyte, with using styrene butadiene rubber and acrylic acid copolymer as binder to figure out lithium-ion battery with 2.5Ah, which is testified to present better performance on cold temperature & cycle life plus having a little bit swelling compared with the lithium-ion battery using only styrene butadiene rubber as binder.

Original language	English
Article number	01007
Journal	MATEC Web of Conferences
Volume	34
DOIs	https://doi.org/10.1051/matecconf/20153401007
Publication status	Published - 11 Dec 2015
Event	2nd International Conference on Mechatronics and Mechanical Engineering, ICMME 2015 - Singapore, Singapore Duration: 15 Sept 2015 → 16 Sept 2015

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1051/matecconf/20153401007

Cite this

@article{8f9f237fdc61477689df75cdc6767c6d,

title = "Influence of adhesive system on performance of SiO/C lithium-ion battery",

abstract = "Silicon based anode material is turning into the research hot point of lithium-ion battery material field due to Si inside supporting higher capacity. Furthermore binder applied as major accessory material of anode system could bring anode material \& current collector together, thus the influence given by binder system to battery performance becomes the key point. The paper describes the procedure of adopting commercial LiCoO2, SiO/C as composite material \& electrolyte, with using styrene butadiene rubber and acrylic acid copolymer as binder to figure out lithium-ion battery with 2.5Ah, which is testified to present better performance on cold temperature \& cycle life plus having a little bit swelling compared with the lithium-ion battery using only styrene butadiene rubber as binder.",

author = "Xin Teng and Yusheng Yang and Qi Liu and Hongliang Xu and Lei Wang and Borong Wu and Chuan Wu and Feng Wu",

note = "Publisher Copyright: {\textcopyright} Owned by the authors, published by EDP Sciences, 2015.; 2nd International Conference on Mechatronics and Mechanical Engineering, ICMME 2015 ; Conference date: 15-09-2015 Through 16-09-2015",

year = "2015",

month = dec,

day = "11",

doi = "10.1051/matecconf/20153401007",

language = "English",

volume = "34",

journal = "MATEC Web of Conferences",

issn = "2261-236X",

publisher = "EDP Sciences",

}

TY - JOUR

T1 - Influence of adhesive system on performance of SiO/C lithium-ion battery

AU - Teng, Xin

AU - Yang, Yusheng

AU - Liu, Qi

AU - Xu, Hongliang

AU - Wang, Lei

AU - Wu, Borong

AU - Wu, Chuan

AU - Wu, Feng

PY - 2015/12/11

Y1 - 2015/12/11

N2 - Silicon based anode material is turning into the research hot point of lithium-ion battery material field due to Si inside supporting higher capacity. Furthermore binder applied as major accessory material of anode system could bring anode material & current collector together, thus the influence given by binder system to battery performance becomes the key point. The paper describes the procedure of adopting commercial LiCoO2, SiO/C as composite material & electrolyte, with using styrene butadiene rubber and acrylic acid copolymer as binder to figure out lithium-ion battery with 2.5Ah, which is testified to present better performance on cold temperature & cycle life plus having a little bit swelling compared with the lithium-ion battery using only styrene butadiene rubber as binder.

AB - Silicon based anode material is turning into the research hot point of lithium-ion battery material field due to Si inside supporting higher capacity. Furthermore binder applied as major accessory material of anode system could bring anode material & current collector together, thus the influence given by binder system to battery performance becomes the key point. The paper describes the procedure of adopting commercial LiCoO2, SiO/C as composite material & electrolyte, with using styrene butadiene rubber and acrylic acid copolymer as binder to figure out lithium-ion battery with 2.5Ah, which is testified to present better performance on cold temperature & cycle life plus having a little bit swelling compared with the lithium-ion battery using only styrene butadiene rubber as binder.

UR - https://www.scopus.com/pages/publications/84976470299

U2 - 10.1051/matecconf/20153401007

DO - 10.1051/matecconf/20153401007

M3 - Conference article

AN - SCOPUS:84976470299

SN - 2261-236X

VL - 34

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 01007

T2 - 2nd International Conference on Mechatronics and Mechanical Engineering, ICMME 2015

Y2 - 15 September 2015 through 16 September 2015

ER -

Influence of adhesive system on performance of SiO/C lithium-ion battery

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this