Hybrid PCB Rogowski Coil for Measurement of Nanosecond-Risetime Pulsed Current

Ruo Yu Han; Jia Wei Wu; Wei Dong Ding; Yan Jing; Hai Bin Zhou; Qiao Jue Liu; Ai Ci Qiu

doi:10.1109/TPS.2015.2415517

Hybrid PCB Rogowski Coil for Measurement of Nanosecond-Risetime Pulsed Current

Ruo Yu Han
, Jia Wei Wu
, Wei Dong Ding
, Yan Jing
, Hai Bin Zhou
, Qiao Jue Liu
, Ai Ci Qiu

Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

32 Citations (Scopus)

Abstract

Self-integrating Rogowski coil has been widely used for measurements of pulsed currents from nanosecond timescale to microsecond timescale in pulsed power systems. Appropriate designs of coil's structure are vital to high-frequency response. This paper proposed a new structure of Rogowski coil so as to provide a better response to fast pulsed current. Four Rogowski coils with different structures were tested in three different platforms. Experimental results showed that the hybrid Printed Circuit Board Rogowski coil had the best performance in this paper, which could respond to square waves with fronts of ∼ 2 ns and had a sensitivity of 0.585 V/kA. The designed maximal peak current was 100 kA.

Original language	English
Article number	7091010
Pages (from-to)	3555-3561
Number of pages	7
Journal	IEEE Transactions on Plasma Science
Volume	43
Issue number	10
DOIs	https://doi.org/10.1109/TPS.2015.2415517
Publication status	Published - 1 Oct 2015
Externally published	Yes

Keywords

High frequency
PCB Rogowski coil
integrating resistor
pulsed current

Access to Document

10.1109/TPS.2015.2415517

Cite this

@article{dbe0f2b0495641be8a47b4bc5b2bab5b,

title = "Hybrid PCB Rogowski Coil for Measurement of Nanosecond-Risetime Pulsed Current",

abstract = "Self-integrating Rogowski coil has been widely used for measurements of pulsed currents from nanosecond timescale to microsecond timescale in pulsed power systems. Appropriate designs of coil's structure are vital to high-frequency response. This paper proposed a new structure of Rogowski coil so as to provide a better response to fast pulsed current. Four Rogowski coils with different structures were tested in three different platforms. Experimental results showed that the hybrid Printed Circuit Board Rogowski coil had the best performance in this paper, which could respond to square waves with fronts of ∼ 2 ns and had a sensitivity of 0.585 V/kA. The designed maximal peak current was 100 kA.",

keywords = "High frequency, PCB Rogowski coil, integrating resistor, pulsed current",

author = "Han, \{Ruo Yu\} and Wu, \{Jia Wei\} and Ding, \{Wei Dong\} and Yan Jing and Zhou, \{Hai Bin\} and Liu, \{Qiao Jue\} and Qiu, \{Ai Ci\}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.",

year = "2015",

month = oct,

day = "1",

doi = "10.1109/TPS.2015.2415517",

language = "English",

volume = "43",

pages = "3555--3561",

journal = "IEEE Transactions on Plasma Science",

issn = "0093-3813",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "10",

}

TY - JOUR

T1 - Hybrid PCB Rogowski Coil for Measurement of Nanosecond-Risetime Pulsed Current

AU - Han, Ruo Yu

AU - Wu, Jia Wei

AU - Ding, Wei Dong

AU - Jing, Yan

AU - Zhou, Hai Bin

AU - Liu, Qiao Jue

AU - Qiu, Ai Ci

PY - 2015/10/1

Y1 - 2015/10/1

N2 - Self-integrating Rogowski coil has been widely used for measurements of pulsed currents from nanosecond timescale to microsecond timescale in pulsed power systems. Appropriate designs of coil's structure are vital to high-frequency response. This paper proposed a new structure of Rogowski coil so as to provide a better response to fast pulsed current. Four Rogowski coils with different structures were tested in three different platforms. Experimental results showed that the hybrid Printed Circuit Board Rogowski coil had the best performance in this paper, which could respond to square waves with fronts of ∼ 2 ns and had a sensitivity of 0.585 V/kA. The designed maximal peak current was 100 kA.

AB - Self-integrating Rogowski coil has been widely used for measurements of pulsed currents from nanosecond timescale to microsecond timescale in pulsed power systems. Appropriate designs of coil's structure are vital to high-frequency response. This paper proposed a new structure of Rogowski coil so as to provide a better response to fast pulsed current. Four Rogowski coils with different structures were tested in three different platforms. Experimental results showed that the hybrid Printed Circuit Board Rogowski coil had the best performance in this paper, which could respond to square waves with fronts of ∼ 2 ns and had a sensitivity of 0.585 V/kA. The designed maximal peak current was 100 kA.

KW - High frequency

KW - PCB Rogowski coil

KW - integrating resistor

KW - pulsed current

UR - https://www.scopus.com/pages/publications/85027920065

U2 - 10.1109/TPS.2015.2415517

DO - 10.1109/TPS.2015.2415517

M3 - Article

AN - SCOPUS:85027920065

SN - 0093-3813

VL - 43

SP - 3555

EP - 3561

JO - IEEE Transactions on Plasma Science

JF - IEEE Transactions on Plasma Science

IS - 10

M1 - 7091010

ER -

Hybrid PCB Rogowski Coil for Measurement of Nanosecond-Risetime Pulsed Current

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this