Skip to main navigation Skip to search Skip to main content

Fabrication of three-dimensional nanoporous nickel by dealloying Mg-Ni-Y metallic glasses in citric acid solutions for high-performance energy storage

  • Lei Zuo
  • , Ran Li
  • , Yu Jin
  • , Hongjie Xu
  • , Tao Zhang
  • Beihang University

Research output: Contribution to journal › Article › peer-review

Abstract

Free-standing nanoporous nickel (np-Ni) ribbons were directly synthesized by dealloying Mg90-xNixY10 metallic glass ribbons in citric acid aqueous solutions under free conditions. Due to the amorphous nature of the Mg90-xNixY10 precursors, the as-dealloyed samples exhibit a uniform nanoporous structure with the ligament size of ?7 nm. Effects of alloy composition, leaching time, and acid concentration on the resulting nanoporous microstructure were discussed. The lower limit of Ni content in Mg90-xNixY10 precursors was identified to be 20%, below which the nanoporous Ni could not be formed. Besides, a linear relationship was established between the ligament size and the leaching time on a logarithmic scale. The ultrafine structure of the obtained np-Ni was associated with the stabilizing effect of citric acid. The as-dealloyed samples with the naturally formed oxide surface of NiO were directly examined as binder-free electrodes for high-performance supercapacitors.

Original languageEnglish
Pages (from-to)A348-A354
JournalJournal of the Electrochemical Society
Volume164
Issue number2
DOIs
Publication statusPublished - 2017
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'Fabrication of three-dimensional nanoporous nickel by dealloying Mg-Ni-Y metallic glasses in citric acid solutions for high-performance energy storage'. Together they form a unique fingerprint.

Cite this