Abstract
Electropulsing treatment was employed to regulate the nanocrystallization behavior and soft magnetic properties of commercial Fe-Si-B-Nb-Cu amorphous ribbons. By adjusting the pulse width at fixed maximum current density and pulse interval, the coercivity (Hc) was reduced to below 0.1 A/m, significantly lower than the 0.5 A/m obtained after optimum conventional annealing. Electropulsing produces phase constituents comparable to those obtained by conventional annealing, while yielding consistently finer nanocrystalline grains, which accounts for the superior magnetic softness. The electropulsing process was completed within 1 min, with a maximum heating rate of 6750 °C/min, demonstrating a pronounced kinetic advantage over furnace annealing. Notably, sufficient nanocrystallization occurred at a measured macroscopic temperature of only about 440 °C, far below the onset crystallization temperature of 533 °C, indicating that electrical effects beyond Joule heating contribute to the nanocrystallization. The applicability of this strategy was further verified in a high-Fe-content Fe-based amorphous alloy, where electropulsing simultaneously reduced Hc and increased magnetic flux density (B800). These results demonstrate that electropulsing is a promising approach for efficient fabrication of high-performance Fe-based soft magnetic nanocrystalline alloys.
| Original language | English |
|---|---|
| Article number | 191131 |
| Journal | Journal of Alloys and Compounds |
| Volume | 1081 |
| DOIs | |
| Publication status | Published - 5 Oct 2026 |
| Externally published | Yes |
Keywords
- Electrical effect
- Electropulsing treatment
- Fe-based amorphous alloys
- Grain refinement
- Nanocrystallization
- Soft magnetic properties
Fingerprint
Dive into the research topics of 'Electropulsing-enabled ultrafast nanocrystallization and exceptional magnetic softening of Fe-based amorphous alloys'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver