Electrochemical performance of Li3V2 (PO 4)3/C cathode material prepared by soft chemistry route

Feng Wang; Feng Wu; Chuan Wu; Ying Bai; Lian Wang

doi:10.4028/www.scientific.net/AMR.129-131.521

Electrochemical performance of Li₃V₂ (PO ₄)₃/C cathode material prepared by soft chemistry route

Feng Wang^*
, Feng Wu
, Chuan Wu
, Ying Bai
, Lian Wang

^*Corresponding author for this work

School of Material Science and Engineering

Beijing Institute of Technology
Chongqing University of Science and Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Monoclinic Li₃V₂ (PO₄)₃/C cathode material has been synthesized by soft chemistry route and the electrochemical performance of this material was investigated. The structure of the particles was characterized by X-ray diffraction (XRD). The Li ₃V₂ (PO₄)₃/C composite exhibits good cycling performance and excellent rate capabilities when cycled between 3.0 and 4.3 V. At 1C rate, the cell displays a reversible capacity of 117 mAh/g and retains 98.1 % of its initial discharge capacity after 50 cycles. At the high rate of 5C, the capacity could reach 109 mAh/g, corresponding to 93 % of that at 0.5C. Electrochemical impedance spectroscopy (EIS) technique was used to analyze the chemical diffusion coefficient of Li.

Original language	English
Title of host publication	Material and Manufacturing Technology
Pages	521-525
Number of pages	5
DOIs	https://doi.org/10.4028/www.scientific.net/AMR.129-131.521
Publication status	Published - 2010
Event	2010 International Conference on Material and Manufacturing Technology, ICMMT 2010 - Chongqing, China Duration: 17 Sept 2010 → 19 Sept 2010

Publication series

Name	Advanced Materials Research
Volume	129-131
ISSN (Print)	1022-6680

Conference

Conference	2010 International Conference on Material and Manufacturing Technology, ICMMT 2010
Country/Territory	China
City	Chongqing
Period	17/09/10 → 19/09/10

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Cathode material
EIS
Lithium vanadium phosphate
Lithium-ion batteries

Access to Document

10.4028/www.scientific.net/AMR.129-131.521

Cite this

@inproceedings{445f1fa1254d4aec9683903ab9fc9da2,

title = "Electrochemical performance of Li3V2 (PO 4)3/C cathode material prepared by soft chemistry route",

abstract = "Monoclinic Li3V2 (PO4)3/C cathode material has been synthesized by soft chemistry route and the electrochemical performance of this material was investigated. The structure of the particles was characterized by X-ray diffraction (XRD). The Li 3V2 (PO4)3/C composite exhibits good cycling performance and excellent rate capabilities when cycled between 3.0 and 4.3 V. At 1C rate, the cell displays a reversible capacity of 117 mAh/g and retains 98.1 \% of its initial discharge capacity after 50 cycles. At the high rate of 5C, the capacity could reach 109 mAh/g, corresponding to 93 \% of that at 0.5C. Electrochemical impedance spectroscopy (EIS) technique was used to analyze the chemical diffusion coefficient of Li.",

keywords = "Cathode material, EIS, Lithium vanadium phosphate, Lithium-ion batteries",

author = "Feng Wang and Feng Wu and Chuan Wu and Ying Bai and Lian Wang",

year = "2010",

doi = "10.4028/www.scientific.net/AMR.129-131.521",

language = "English",

isbn = "9780878492435",

series = "Advanced Materials Research",

pages = "521--525",

booktitle = "Material and Manufacturing Technology",

note = "2010 International Conference on Material and Manufacturing Technology, ICMMT 2010 ; Conference date: 17-09-2010 Through 19-09-2010",

}

Wang, F, Wu, F, Wu, C , Bai, Y & Wang, L 2010, Electrochemical performance of Li₃V₂ (PO ₄)₃/C cathode material prepared by soft chemistry route. in Material and Manufacturing Technology. Advanced Materials Research, vol. 129-131, pp. 521-525, 2010 International Conference on Material and Manufacturing Technology, ICMMT 2010, Chongqing, China, 17/09/10. https://doi.org/10.4028/www.scientific.net/AMR.129-131.521

TY - GEN

T1 - Electrochemical performance of Li3V2 (PO 4)3/C cathode material prepared by soft chemistry route

AU - Wang, Feng

AU - Wu, Feng

AU - Wu, Chuan

AU - Bai, Ying

AU - Wang, Lian

PY - 2010

Y1 - 2010

N2 - Monoclinic Li3V2 (PO4)3/C cathode material has been synthesized by soft chemistry route and the electrochemical performance of this material was investigated. The structure of the particles was characterized by X-ray diffraction (XRD). The Li 3V2 (PO4)3/C composite exhibits good cycling performance and excellent rate capabilities when cycled between 3.0 and 4.3 V. At 1C rate, the cell displays a reversible capacity of 117 mAh/g and retains 98.1 % of its initial discharge capacity after 50 cycles. At the high rate of 5C, the capacity could reach 109 mAh/g, corresponding to 93 % of that at 0.5C. Electrochemical impedance spectroscopy (EIS) technique was used to analyze the chemical diffusion coefficient of Li.

AB - Monoclinic Li3V2 (PO4)3/C cathode material has been synthesized by soft chemistry route and the electrochemical performance of this material was investigated. The structure of the particles was characterized by X-ray diffraction (XRD). The Li 3V2 (PO4)3/C composite exhibits good cycling performance and excellent rate capabilities when cycled between 3.0 and 4.3 V. At 1C rate, the cell displays a reversible capacity of 117 mAh/g and retains 98.1 % of its initial discharge capacity after 50 cycles. At the high rate of 5C, the capacity could reach 109 mAh/g, corresponding to 93 % of that at 0.5C. Electrochemical impedance spectroscopy (EIS) technique was used to analyze the chemical diffusion coefficient of Li.

KW - Cathode material

KW - EIS

KW - Lithium vanadium phosphate

KW - Lithium-ion batteries

UR - https://www.scopus.com/pages/publications/78650732342

U2 - 10.4028/www.scientific.net/AMR.129-131.521

DO - 10.4028/www.scientific.net/AMR.129-131.521

M3 - Conference contribution

AN - SCOPUS:78650732342

SN - 9780878492435

T3 - Advanced Materials Research

SP - 521

EP - 525

BT - Material and Manufacturing Technology

T2 - 2010 International Conference on Material and Manufacturing Technology, ICMMT 2010

Y2 - 17 September 2010 through 19 September 2010

ER -