Effects of various second phase ratios and contents on microstructure and mechanical properties of eutectic Sn58Bi alloy

A distinctive low melting point heterostructure alloy (LMH) Sn-Bi-Cu-Zn-Ag-Sb was prepared by introducing different ratios and contents of second phase into the eutectic Sn58Bi alloy (SBE). Rapid solidification results in a dispersion of Cu₅Zn₈, Ag₃Sn, and SbSn precipitated phases in Sn53Bi3Cu3Zn2Ag2Sb (LMH32). Besides, the nano-sized η'-Cu₆Sn₅ and Ag₃Sn phases were also observed in the alloy matrix. During solidification, the Cu₅Zn₈ and Ag₃Sn phases are used as the heterogeneous nucleation matrix of the Sn and Bi phases, which significantly refines the eutectic structure and leads to fine-grained strengthening. And the formation of Sn(Sb) solid solution phase leads to solid solution strengthening. The significant mechanical incompatibility between the matrix and the second phases of the LMHs produces a higher back stress hardening effect. The coupling effect of multiple strengthening mechanisms causes the ultimate tensile strength (UTS) of LMH32 reaches 102 MPa, higher 88.9% than that of SBE, and the elongation reaches 12.8%, but the melting point does not change significantly.