Abstract
With the evolution of electronic packaging toward miniaturization and high-frequency operation, Ultra-high-density interconnect (UHDI) technology has emerged as a pivotal solution to overcome the I/O bottleneck of chips, imposing increasingly stringent demands on the thermal, mechanical, and electrical performance of packaging substrates. Under high-power-density conditions, efficient thermal management and reliable interconnection constitute core challenges. Ceramic substrates have garnered significant attention owing to their high thermal conductivity, excellent mechanical properties, and silicon-matched coefficient of thermal expansion (CTE). Among them, aluminum nitride (AIN) exhibits superior thermal conductivity but suffers from insufficient mechanical strength; alumina (Al2O3) offers low cost but is limited by its modest thermal conductivity; in contrast silicon nitride (Si3N4) combines high thermal conductivity, high flexural strength, and a CTE closely matching that of silicon, positioning it as an ideal substrate material for UHDI applications. To realize conductive pathways and reliable interconnections on ceramic surfaces, existing metallization technologies-such as Active Metal Brazing (AMB) and Direct Bonded Copper (DBC)-face drawbacks including high cost, process complexity, or compromised thermal conductivity. While the thick-film technique demonstrates distinct advantages for ceramic substrate metallization, current research primarily focuses on Al2O3 and AIN, with limited investigation dedicated to Si3N4 substrates.In this work, a conductive silver paste incorporating ZnOB2O3-SiO2 (ZBS) glass was developed. Given that the glass phase plays a critical role in dispersing silver particles and mediating adhesion to the Si3N4 substrate, it served as the primary focus of this study. With the mass ratio of B2O3 to SiO2 fixed at 6:1, the proportion of ZnO was systematically varied. Comprehensive characterization was conducted using Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), and contact angle measurements to select the optimal glass frit for silver paste fabrication. Subsequent sintering experiments were performed to evaluate the process compatibility between the silver paste and Si3N4 substrates. Shear strength and sheet resistance under various processing parameters were measured using a push-pull tester and a four-point probe, respectively. This study holds significant importance for advancing high-performance Si3N4 substrates and promoting the development of thick-film metallization, wiring, and interconnection technologies.
| Original language | English |
|---|---|
| Title of host publication | 2026 27th International Conference on Electronic Packaging Technology, ICEPT 2026 |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Edition | 2026 |
| ISBN (Electronic) | 9798319531117 |
| DOIs | |
| Publication status | Published - 2026 |
| Externally published | Yes |
| Event | 27th International Conference on Electronic Packaging Technology, ICEPT 2026 - Xi'an, China Duration: 5 Aug 2026 → 7 Aug 2026 |
Conference
| Conference | 27th International Conference on Electronic Packaging Technology, ICEPT 2026 |
|---|---|
| Country/Territory | China |
| City | Xi'an |
| Period | 5/08/26 → 7/08/26 |
Keywords
- Interconnection
- Microstructure characterization
- Silicon nitride ceramics
- Thick film paste
- ZBS glass
Fingerprint
Dive into the research topics of 'Development and Characterization of ZnO-B2O3-SiO2Glass Frit based Silver Paste for High-Performance Interconnects Compatible to Silicon Nitride Substrates'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver