Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA

Zhang Yanjun; Hong Yingping; Liu Wei; Jiang Wei

doi:10.1109/ICCSN.2011.6013717

Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA

Zhang Yanjun^*
, Hong Yingping
, Liu Wei
, Jiang Wei

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

Acquisition Device is the core of this system. Acquisition module is controlled by the Ground monitoring device, which is responsible for collecting 48 routes analog signal with different sampling rate, receiving digital signals transported by RS-422 (1 route), and transmitting acquired analog and digital signals to ground monitoring device for real-time monitoring. At the same time, after mixing and compiling frame, Acquisition module sends signals to the storage module in parallel way. The collected signals are analyzed by means of the date which is read out of the storage module. This acquisition and controlling system has been applied in the check of flight test in one flight vehicle.

Original language	English
Title of host publication	2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011
Pages	292-295
Number of pages	4
DOIs	https://doi.org/10.1109/ICCSN.2011.6013717
Publication status	Published - 2011
Externally published	Yes
Event	2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011 - Xi'an, China Duration: 27 May 2011 → 29 May 2011

Publication series

Name	2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011

Conference

Conference	2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011
Country/Territory	China
City	Xi'an
Period	27/05/11 → 29/05/11

Keywords

acquisition and controlling
digital-analog signal
multichannel
parallel way
RS-422 interface

Access to Document

10.1109/ICCSN.2011.6013717

Cite this

Yanjun, Z., Yingping, H., Wei, L., & Wei, J. (2011). Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA. In 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011 (pp. 292-295). Article 6013717 (2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011). https://doi.org/10.1109/ICCSN.2011.6013717

@inproceedings{dd53887494a34a61b75f566428fc10f9,

title = "Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA",

abstract = "Acquisition Device is the core of this system. Acquisition module is controlled by the Ground monitoring device, which is responsible for collecting 48 routes analog signal with different sampling rate, receiving digital signals transported by RS-422 (1 route), and transmitting acquired analog and digital signals to ground monitoring device for real-time monitoring. At the same time, after mixing and compiling frame, Acquisition module sends signals to the storage module in parallel way. The collected signals are analyzed by means of the date which is read out of the storage module. This acquisition and controlling system has been applied in the check of flight test in one flight vehicle.",

keywords = "acquisition and controlling, digital-analog signal, multichannel, parallel way, RS-422 interface",

author = "Zhang Yanjun and Hong Yingping and Liu Wei and Jiang Wei",

year = "2011",

doi = "10.1109/ICCSN.2011.6013717",

language = "English",

isbn = "9781612844855",

series = "2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011",

pages = "292--295",

booktitle = "2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011",

note = "2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011 ; Conference date: 27-05-2011 Through 29-05-2011",

}

Yanjun, Z, Yingping, H, Wei, L & Wei, J 2011, Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA. in 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011., 6013717, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, pp. 292-295, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, Xi'an, China, 27/05/11. https://doi.org/10.1109/ICCSN.2011.6013717

Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA. / Yanjun, Zhang; Yingping, Hong; Wei, Liu et al.
2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. 2011. p. 292-295 6013717 (2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA

AU - Yanjun, Zhang

AU - Yingping, Hong

AU - Wei, Liu

AU - Wei, Jiang

PY - 2011

Y1 - 2011

N2 - Acquisition Device is the core of this system. Acquisition module is controlled by the Ground monitoring device, which is responsible for collecting 48 routes analog signal with different sampling rate, receiving digital signals transported by RS-422 (1 route), and transmitting acquired analog and digital signals to ground monitoring device for real-time monitoring. At the same time, after mixing and compiling frame, Acquisition module sends signals to the storage module in parallel way. The collected signals are analyzed by means of the date which is read out of the storage module. This acquisition and controlling system has been applied in the check of flight test in one flight vehicle.

AB - Acquisition Device is the core of this system. Acquisition module is controlled by the Ground monitoring device, which is responsible for collecting 48 routes analog signal with different sampling rate, receiving digital signals transported by RS-422 (1 route), and transmitting acquired analog and digital signals to ground monitoring device for real-time monitoring. At the same time, after mixing and compiling frame, Acquisition module sends signals to the storage module in parallel way. The collected signals are analyzed by means of the date which is read out of the storage module. This acquisition and controlling system has been applied in the check of flight test in one flight vehicle.

KW - acquisition and controlling

KW - digital-analog signal

KW - multichannel

KW - parallel way

KW - RS-422 interface

UR - https://www.scopus.com/pages/publications/80053139592

U2 - 10.1109/ICCSN.2011.6013717

DO - 10.1109/ICCSN.2011.6013717

M3 - Conference contribution

AN - SCOPUS:80053139592

SN - 9781612844855

T3 - 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011

SP - 292

EP - 295

BT - 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011

T2 - 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011

Y2 - 27 May 2011 through 29 May 2011

ER -

Yanjun Z, Yingping H, Wei L, Wei J. Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA. In 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. 2011. p. 292-295. 6013717. (2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011). doi: 10.1109/ICCSN.2011.6013717

Design of acquisition and controlling system for multi-channel digital-analog signal based on FPGA

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this