Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array

Jiansen Ye; Xin Wang; Zhuo Li; Yang Yang; Rui Xu; Rui Shi

doi:10.1117/12.2193519

Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array

Jiansen Ye
, Xin Wang
, Zhuo Li
, Yang Yang
, Rui Xu
, Rui Shi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

With the development of optical fiber communication, dense wavelength division multiplexing (DWDM) system is important for the rapid management of multi-wavelength in the core node of the optical transmission network. In this paper, a reconfigurable optical add-drop multiplexer (ROADM) based on the tunable Fabry-Perot (F-P) array is proposed. An optical switch with high isolation and low crosstalk is designed by using the characteristics of filtering and tuning for the F-P array. The principle, structure, and function of the tunable F-P array are introduced. The characteristics of filtering and tuning for the F-P filter are also calculated, and the factor for the isolation, crosstalk, response time and insertion loss are analyzed. A single physical channel ROADM with 16 signal channels, which operates in C-band, is designed and optimized by simulation.

Original language	English
Title of host publication	2015 International Conference on Optical Instruments and Technology
Subtitle of host publication	Optoelectronic Devices and Optical Signal Processing, OIT 2015
Editors	Jian Wu, Yi Dong, Chao Lu, Zhaohui Li
Publisher	SPIE
ISBN (Electronic)	9781628418002
DOIs	https://doi.org/10.1117/12.2193519
Publication status	Published - 2015
Externally published	Yes
Event	2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015 - Beijing, China Duration: 17 May 2015 → 19 May 2015

Publication series

Name	Proceedings of SPIE - The International Society for Optical Engineering
Volume	9619
ISSN (Print)	0277-786X
ISSN (Electronic)	1996-756X

Conference

Conference	2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015
Country/Territory	China
City	Beijing
Period	17/05/15 → 19/05/15

Keywords

Dense wavelength Division Multiplexing(DWDM)
F-P array
F-P filter characteristics
F-P tuning characteristics
Insertion loss
Optical communication
Reconfigurable optical add-drop multiplexer ROADM

Access to Document

10.1117/12.2193519

Cite this

Ye, J., Wang, X., Li, Z., Yang, Y., Xu, R., & Shi, R. (2015). Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array. In J. Wu, Y. Dong, C. Lu, & Z. Li (Eds.), 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015 Article 96190W (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 9619). SPIE. https://doi.org/10.1117/12.2193519

Ye, Jiansen ; Wang, Xin ; Li, Zhuo et al. / Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array. 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015. editor / Jian Wu ; Yi Dong ; Chao Lu ; Zhaohui Li. SPIE, 2015. (Proceedings of SPIE - The International Society for Optical Engineering).

@inproceedings{a72d63405457422faeeecf59f7b6b385,

title = "Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array",

abstract = "With the development of optical fiber communication, dense wavelength division multiplexing (DWDM) system is important for the rapid management of multi-wavelength in the core node of the optical transmission network. In this paper, a reconfigurable optical add-drop multiplexer (ROADM) based on the tunable Fabry-Perot (F-P) array is proposed. An optical switch with high isolation and low crosstalk is designed by using the characteristics of filtering and tuning for the F-P array. The principle, structure, and function of the tunable F-P array are introduced. The characteristics of filtering and tuning for the F-P filter are also calculated, and the factor for the isolation, crosstalk, response time and insertion loss are analyzed. A single physical channel ROADM with 16 signal channels, which operates in C-band, is designed and optimized by simulation.",

keywords = "Dense wavelength Division Multiplexing(DWDM), F-P array, F-P filter characteristics, F-P tuning characteristics, Insertion loss, Optical communication, Reconfigurable optical add-drop multiplexer ROADM",

author = "Jiansen Ye and Xin Wang and Zhuo Li and Yang Yang and Rui Xu and Rui Shi",

note = "Publisher Copyright: {\textcopyright} COPYRIGHT 2015 SPIE.; 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015 ; Conference date: 17-05-2015 Through 19-05-2015",

year = "2015",

doi = "10.1117/12.2193519",

language = "English",

series = "Proceedings of SPIE - The International Society for Optical Engineering",

publisher = "SPIE",

editor = "Jian Wu and Yi Dong and Chao Lu and Zhaohui Li",

booktitle = "2015 International Conference on Optical Instruments and Technology",

address = "United States",

}

Ye, J, Wang, X, Li, Z, Yang, Y, Xu, R & Shi, R 2015, Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array. in J Wu, Y Dong, C Lu & Z Li (eds), 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015., 96190W, Proceedings of SPIE - The International Society for Optical Engineering, vol. 9619, SPIE, 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015, Beijing, China, 17/05/15. https://doi.org/10.1117/12.2193519

Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array. / Ye, Jiansen; Wang, Xin; Li, Zhuo et al.
2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015. ed. / Jian Wu; Yi Dong; Chao Lu; Zhaohui Li. SPIE, 2015. 96190W (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 9619).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array

AU - Ye, Jiansen

AU - Wang, Xin

AU - Li, Zhuo

AU - Yang, Yang

AU - Xu, Rui

AU - Shi, Rui

PY - 2015

Y1 - 2015

N2 - With the development of optical fiber communication, dense wavelength division multiplexing (DWDM) system is important for the rapid management of multi-wavelength in the core node of the optical transmission network. In this paper, a reconfigurable optical add-drop multiplexer (ROADM) based on the tunable Fabry-Perot (F-P) array is proposed. An optical switch with high isolation and low crosstalk is designed by using the characteristics of filtering and tuning for the F-P array. The principle, structure, and function of the tunable F-P array are introduced. The characteristics of filtering and tuning for the F-P filter are also calculated, and the factor for the isolation, crosstalk, response time and insertion loss are analyzed. A single physical channel ROADM with 16 signal channels, which operates in C-band, is designed and optimized by simulation.

AB - With the development of optical fiber communication, dense wavelength division multiplexing (DWDM) system is important for the rapid management of multi-wavelength in the core node of the optical transmission network. In this paper, a reconfigurable optical add-drop multiplexer (ROADM) based on the tunable Fabry-Perot (F-P) array is proposed. An optical switch with high isolation and low crosstalk is designed by using the characteristics of filtering and tuning for the F-P array. The principle, structure, and function of the tunable F-P array are introduced. The characteristics of filtering and tuning for the F-P filter are also calculated, and the factor for the isolation, crosstalk, response time and insertion loss are analyzed. A single physical channel ROADM with 16 signal channels, which operates in C-band, is designed and optimized by simulation.

KW - Dense wavelength Division Multiplexing(DWDM)

KW - F-P array

KW - F-P filter characteristics

KW - F-P tuning characteristics

KW - Insertion loss

KW - Optical communication

KW - Reconfigurable optical add-drop multiplexer ROADM

UR - https://www.scopus.com/pages/publications/84943423906

U2 - 10.1117/12.2193519

DO - 10.1117/12.2193519

M3 - Conference contribution

AN - SCOPUS:84943423906

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - 2015 International Conference on Optical Instruments and Technology

A2 - Wu, Jian

A2 - Dong, Yi

A2 - Lu, Chao

A2 - Li, Zhaohui

PB - SPIE

T2 - 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015

Y2 - 17 May 2015 through 19 May 2015

ER -

Ye J, Wang X, Li Z, Yang Y, Xu R, Shi R. Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array. In Wu J, Dong Y, Lu C, Li Z, editors, 2015 International Conference on Optical Instruments and Technology: Optoelectronic Devices and Optical Signal Processing, OIT 2015. SPIE. 2015. 96190W. (Proceedings of SPIE - The International Society for Optical Engineering). doi: 10.1117/12.2193519

Design of a reconfigurable optical add/drop multiplexer based on tunable Fabry-Perot array

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this