Delay-Tap-Sampling-Based Chromatic Dispersion Estimation Method with Ultra-Low Sampling Rate for Optical Fiber Communication Systems

A cost-effective chromatic dispersion (CD) estimation method is proposed, which is based on the delay-tap sampling (DTS) technique in combination with periodic training sequences (PTS). By performing equivalent sampling of PTS, DTS-based CD estimation at ultra-low sampling rate can be realized, significantly reducing the cost and high-speed requirements of analog to digital converters (ADCs). In contrast to the existing Nyquist DTS-based CD estimation method, we construct the CD lookup table in the CD over-compensated region, which can be suitable for a dynamic range of OSNR conditions. The CD lookup table built from the simulation can be used in the experimental system with similar configurations directly, indicating that the suggested method is reasonable and highly feasible. Besides, with only 1.25 GSa/s sampling rate of ADCs (about 1/30 of the Nyquist sampling rate which is 40.28 GSa/s), both 20.14 GBaud quadrature-phase-shift-keying (QPSK) simulation and experimental systems demonstrate the feasibility of the method, with a 28 ps/nm maximum CD estimation error for the simulation and a 35 ps/nm maximum CD estimation error for the experiment when OSNR is fixed to 18 dB. Furthermore, we also investigate the robustness of our method under the condition of different amplifier spontaneous emission (ASE) noise and nonlinear noise. The proposed method shows great potential for making a remarkable cost reduction in CD monitoring.