Composition and bioactivity of calcium phosphate coatings on anodic oxide nanotubes formed on pure Ti and Ti-6Al-4V alloy substrates

Qianting Yao, Yingying Jiang, Shuo Tan, Xinyi Fu, Bo Li*, Lijia Liu

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)

Abstract

Electronic structure and bioactivity of calcium phosphate (CaP) coatings on Ti-based anodic nanotubes are investigated. Nanotubes on pure Ti and Ti-6Al-4V alloy, respectively, are used as substrates for CaP deposition. The CaP coatings are formed by first growing a seeding CaP layer using alternative immersion (AIM) treatment followed by crystallization in Dulbecco's phosphate-buffered saline (DPBS). CaP coatings formed on both Ti and Ti-6Al-4V substrates are found containing a variety of bioactive CaP species, such as hydroxyapatite (HA), amorphous CaP (ACP), octacalcium phosphate (OCP), and dicalcium phosphate dihydrate (DCPD). The compositions of the coatings during the nucleation and crystallization processes are tracked and analyzed using X-ray absorption near-edge structure (XANES). The variation of CaP species in the resulted coatings are found strongly dependent on the choice of metal substrates, which leads to different bioactivities. By comparing the proliferation and differentiation of osteoblast cells (MC3T3-E1) on the CaP coatings, correlations between CaP species and their bioactivities are established.

Original languageEnglish
Article number110687
JournalMaterials Science and Engineering C
Volume110
DOIs
Publication statusPublished - May 2020

Keywords

  • Anodic nanotubes
  • Calcium phosphate
  • Composition analysis
  • Osteoblast
  • X-ray absorption near-edge structure

Fingerprint

Dive into the research topics of 'Composition and bioactivity of calcium phosphate coatings on anodic oxide nanotubes formed on pure Ti and Ti-6Al-4V alloy substrates'. Together they form a unique fingerprint.

Cite this