Assessment method of dynamic reactive power valuation for transient voltage stability

Yan Li; Jinli Zhao; Zhelin Liu; Peng Li; Xin Zhang; Xiaojun Tang

doi:10.1109/TENCON.2013.6718516

Assessment method of dynamic reactive power valuation for transient voltage stability

Yan Li
, Jinli Zhao^*
, Zhelin Liu
, Peng Li
, Xin Zhang
, Xiaojun Tang

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

Dynamic reactive power sources can make response for reactive power demand rapidly in order to improve power system transient voltage stability. As reactive power is a local product, its value to transient voltage support very much depends on the location in the power system. Meanwhile, the value of reactive power compensation at the same location is nonlinear as well. It has resulted in a great need to quantify the value of reactive power support from dynamic reactive power sources for transient voltage stability. This paper presents a method of equivalent dynamic reactive power valuation for transient voltage stability. This method emphasizes that the valuation of dynamic reactive power sources should be based on their contributions to system transient voltage stability. The effectiveness of the proposed method has been tested on a 10-bus test system.

Original language	English
Title of host publication	2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings
DOIs	https://doi.org/10.1109/TENCON.2013.6718516
Publication status	Published - 2013
Externally published	Yes
Event	2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Xi'an, Shaanxi, China Duration: 22 Oct 2013 → 25 Oct 2013

Publication series

Name	IEEE Region 10 Annual International Conference, Proceedings/TENCON
ISSN (Print)	2159-3442
ISSN (Electronic)	2159-3450

Conference

Conference	2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013
Country/Territory	China
City	Xi'an, Shaanxi
Period	22/10/13 → 25/10/13

Keywords

dynamic reactive power sources
reactive power valuation
transient voltage stability

Access to Document

10.1109/TENCON.2013.6718516

Cite this

Li, Y., Zhao, J., Liu, Z., Li, P., Zhang, X., & Tang, X. (2013). Assessment method of dynamic reactive power valuation for transient voltage stability. In 2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings Article 6718516 (IEEE Region 10 Annual International Conference, Proceedings/TENCON). https://doi.org/10.1109/TENCON.2013.6718516

@inproceedings{764ebe185d6c432a8905102fc952d69a,

title = "Assessment method of dynamic reactive power valuation for transient voltage stability",

abstract = "Dynamic reactive power sources can make response for reactive power demand rapidly in order to improve power system transient voltage stability. As reactive power is a local product, its value to transient voltage support very much depends on the location in the power system. Meanwhile, the value of reactive power compensation at the same location is nonlinear as well. It has resulted in a great need to quantify the value of reactive power support from dynamic reactive power sources for transient voltage stability. This paper presents a method of equivalent dynamic reactive power valuation for transient voltage stability. This method emphasizes that the valuation of dynamic reactive power sources should be based on their contributions to system transient voltage stability. The effectiveness of the proposed method has been tested on a 10-bus test system.",

keywords = "dynamic reactive power sources, reactive power valuation, transient voltage stability",

author = "Yan Li and Jinli Zhao and Zhelin Liu and Peng Li and Xin Zhang and Xiaojun Tang",

year = "2013",

doi = "10.1109/TENCON.2013.6718516",

language = "English",

isbn = "9781479928262",

series = "IEEE Region 10 Annual International Conference, Proceedings/TENCON",

booktitle = "2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings",

note = "2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 ; Conference date: 22-10-2013 Through 25-10-2013",

}

Li, Y, Zhao, J, Liu, Z, Li, P, Zhang, X & Tang, X 2013, Assessment method of dynamic reactive power valuation for transient voltage stability. in 2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings., 6718516, IEEE Region 10 Annual International Conference, Proceedings/TENCON, 2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013, Xi'an, Shaanxi, China, 22/10/13. https://doi.org/10.1109/TENCON.2013.6718516

Assessment method of dynamic reactive power valuation for transient voltage stability. / Li, Yan; Zhao, Jinli; Liu, Zhelin et al.
2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings. 2013. 6718516 (IEEE Region 10 Annual International Conference, Proceedings/TENCON).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Assessment method of dynamic reactive power valuation for transient voltage stability

AU - Li, Yan

AU - Zhao, Jinli

AU - Liu, Zhelin

AU - Li, Peng

AU - Zhang, Xin

AU - Tang, Xiaojun

PY - 2013

Y1 - 2013

N2 - Dynamic reactive power sources can make response for reactive power demand rapidly in order to improve power system transient voltage stability. As reactive power is a local product, its value to transient voltage support very much depends on the location in the power system. Meanwhile, the value of reactive power compensation at the same location is nonlinear as well. It has resulted in a great need to quantify the value of reactive power support from dynamic reactive power sources for transient voltage stability. This paper presents a method of equivalent dynamic reactive power valuation for transient voltage stability. This method emphasizes that the valuation of dynamic reactive power sources should be based on their contributions to system transient voltage stability. The effectiveness of the proposed method has been tested on a 10-bus test system.

AB - Dynamic reactive power sources can make response for reactive power demand rapidly in order to improve power system transient voltage stability. As reactive power is a local product, its value to transient voltage support very much depends on the location in the power system. Meanwhile, the value of reactive power compensation at the same location is nonlinear as well. It has resulted in a great need to quantify the value of reactive power support from dynamic reactive power sources for transient voltage stability. This paper presents a method of equivalent dynamic reactive power valuation for transient voltage stability. This method emphasizes that the valuation of dynamic reactive power sources should be based on their contributions to system transient voltage stability. The effectiveness of the proposed method has been tested on a 10-bus test system.

KW - dynamic reactive power sources

KW - reactive power valuation

KW - transient voltage stability

UR - https://www.scopus.com/pages/publications/84894368633

U2 - 10.1109/TENCON.2013.6718516

DO - 10.1109/TENCON.2013.6718516

M3 - Conference contribution

AN - SCOPUS:84894368633

SN - 9781479928262

T3 - IEEE Region 10 Annual International Conference, Proceedings/TENCON

BT - 2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013 - Conference Proceedings

T2 - 2013 IEEE International Conference of IEEE Region 10, IEEE TENCON 2013

Y2 - 22 October 2013 through 25 October 2013

ER -

Assessment method of dynamic reactive power valuation for transient voltage stability

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this