Skip to main navigation Skip to search Skip to main content

热丝电弧增材制造 TA15-Nb 梯度材料的原位制备工艺

Translated title of the contribution: In-situ preparation technology of TA15-Nb gradient materials by hot wire arc additive manufacturing
  • Changyuan Li
  • , Siyi Peng
  • , Yue Guo
  • , Bin Liu
  • , Changmeng Liu*
  • *Corresponding author for this work
  • Nuclear Power Institute of China
  • Ltd
  • China Aerospace Science and Technology Corporation
  • Beijing Institute of Technology

Research output: Contribution to journal › Article › peer-review

Abstract

Titanium alloys are widely used in aerospace fields due to their light weight, high specific strength and excellent corrosion resistance. However, most titanium alloys are not suitable for the high-temperature resulted from the high-speed movement of aircraft, which limits their application. In this paper, the wire arc additive manufacturing (WAAM) was adopted, with TA15 titanium alloy as the base material and Nb metal as the high-temperature resistant coating, to study the preparation and performance of the gradient material. Through experiments on the melting deposition process, high-temperature mechanical properties and microstructure morphology, the feasibility of this manufacturing method was verified. The results show that DC auxiliary heat source can effectively achieve short circuiting transfer and significantly improve the forming stability, in the range from 600 ℃ to 1000 ℃, the strength of TA15-Nb gradient material decreases, while the elongation increases. The tensile strength of Nb reaches 65 MPa at 1000 ℃, which is 3.5 times that of TA15. The leading edge ablation of the A15-Nb part is only about 0.5 mm after the ablation test, which is reduced by an order of magnitude compared to that of TA15, and the ablation resistance performance is significantly improved. The microstructure morphology of the sample shows a coarse-fine-coarse gradient along the height direction, and is layered near the interface, forming transition zones, fragmented equiaxed crystals and needle-like β phases, etc. The wire arc additive manufacturing can effectively prepare TA15-Nb high-temperature resistant gradient materials, which also provides a possible direction for the optimization of materials in the future.

Translated title of the contributionIn-situ preparation technology of TA15-Nb gradient materials by hot wire arc additive manufacturing
Original languageChinese (Traditional)
Pages (from-to)2680-2692
Number of pages13
JournalZhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
Volume36
Issue number7
DOIs
Publication statusPublished - Jul 2026
Externally publishedYes

Fingerprint

Dive into the research topics of 'In-situ preparation technology of TA15-Nb gradient materials by hot wire arc additive manufacturing'. Together they form a unique fingerprint.

Cite this